Hey, do a search on RVC tachometer and you will find a few listings for Smiths Tachometer RVI to RVC conversion boards. Spiyda Design does pay ...   08-01-2013 04:01 am

Art, Thanks for the clarification on the pins and there location. I took liberty last night and made an aluminum plate. It is mounted ...   07-30-2013 08:05 pm

Why the rope seal cannot be changed to a one piece modern seal. ...   07-29-2013 09:28 pm

Either the clutch cable is not properly adjusted or the transmissions syncromesh is getting tired on the two gears your having trouble with or the ...   07-29-2013 08:56 pm

No, the tail shaft housing will slip right off the out put shaft were there is a nice large plastic gear which drives the speedo ...   07-16-2013 03:43 am

I picked up some STP oil treatment with the ZDDP additive in it and was thinking I might soak the rope seal halves in this ...   07-15-2013 08:27 pm

I'm in the middle of sorting out 11602's 4 speed box. The longish aluminum frame that caps off the top of the cast iron center ...   07-12-2013 09:35 pm

Wish I had read this before last week. It would seem that my plastic pin/s was indeed sheared and was in part the reason for ...   07-09-2013 08:15 pm

Well it would seem that this VIN is now mine 11602. I pulled the transmission last night as it had barely enough oil in it to ...   07-09-2013 08:02 pm

Vin #: 11602 Purchased 07/23/2013 Engine # B73 02 1791 Year of Build: 07-03-1973 Location: Mission Viejo, CA Condition: Running on three cylinders but has weak looking spark on all ...   06-30-2013 02:58 pm