Home 
Home Search search Menu menu Not logged in - Login | Register
> redracer

Profile Topics Posts
Posts by redracer
617 postsShowing posts 121-160 of 617

Body & interior stuff > Cam Cover Painting & Prep work (12 replies - 5715 views)

...   09-30-2021 09:15 pm

Body & interior stuff > Cam Cover Painting & Prep work (12 replies - 5715 views)

...   09-30-2021 09:15 pm

Body & interior stuff > Cam Cover Painting & Prep work (12 replies - 5715 views)

...   09-30-2021 09:14 pm

Body & interior stuff > Cam Cover Painting & Prep work (12 replies - 5715 views)

...   09-30-2021 09:14 pm

Body & interior stuff > Cam Cover Painting & Prep work (12 replies - 5715 views)

...   09-30-2021 09:14 pm

Body & interior stuff > Cam Cover Painting & Prep work (12 replies - 5715 views)

...   09-30-2021 09:14 pm

Body & interior stuff > Cam Cover Painting & Prep work (12 replies - 5715 views)

Fore those who like to keep the cam covers with their original wrinkle finish and "grooved"/"shaved aluminum top section, this is for you! The prep work ...   09-30-2021 09:14 pm

Engine & Transmission > T-Belt Eccentric Tensioner - Hex Size on Hub Drive. (7 replies - 4570 views)

The very early ones with the hex behind the bearings was 35 or 36 mm.(I no longer use those, although I do have the tool ...   09-30-2021 08:54 pm

Ignition > Valve clearance with paper gasket (4 replies - 3188 views)

Please, DO NOT EVEN CONSIDER USING PAPER A PAPER GASKET. They leaked despite compound plus they would shrink, giving smaller valve clearances, possibly leading to ...   09-21-2021 03:59 pm

Miscellaneous > UBSCC All British Motoring Show 2021 (Dixon CA) Jensen Healeys (2 replies - 2248 views)

Having seen your car in other earlier pictures, you probably would have won without the top. btw, do you know who owns the other 3 J-H? ...   09-21-2021 12:57 am

Suspension > Lower Front Arm strengthening (7 replies - 4123 views)

...   09-20-2021 12:11 am

Suspension > Lower Front Arm strengthening (7 replies - 4123 views)

...   09-20-2021 12:11 am

Suspension > Lower Front Arm strengthening (7 replies - 4123 views)

...   09-20-2021 12:10 am

Suspension > Lower Front Arm strengthening (7 replies - 4123 views)

Here's good advice for anyone redoing their front suspension. The lower arm has 2 pices of support for the bolt on the backside, but only ...   09-20-2021 12:10 am

Engine & Transmission > Valve Shimming Sheet (0 replies - 1682 views)

Here's the sheet I made up over 40 years to help with the valve shimming: ...   09-19-2021 09:44 pm

Engine & Transmission > valve cover sealing. (12 replies - 11283 views)

Here's the instruction sheet(Greg at JHPS sells them) that should be helpful: ...   09-19-2021 09:40 pm

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

Your final picture should look similar to this: ...   09-14-2021 07:27 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

Now use the screwdriver over the other end of the spring and "lever" it into the hole ABOVE the spring already there. ...   09-14-2021 07:26 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

Finally, take the last spring and start it over the handbrake metal piece as shown ...   09-14-2021 07:25 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

Before installing the final spring(here's where the small rounded screwdriver is used), lift up the upper toothed adjuster and push the lower adjuster all the ...   09-14-2021 07:23 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

Install the spring hold-down for the front shoe ...   09-14-2021 07:20 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

...   09-14-2021 07:19 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

With your fingers, now push the front shoe into its upper slot. ...   09-14-2021 07:17 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

Take the upper spring and first place an end into the rear shoe hole BEHIND the shoe. Then place the other end into the corresponding ...   09-14-2021 07:16 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

Install the hold-down for the rear shoe. ...   09-14-2021 07:13 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

Now snag the corresponding hole with the other end of the spring on the rear shoe, and pull the front/leading shoe into its wheel cylinder ...   09-14-2021 07:11 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

Take the spring shown(the one that goes behind the toothed adjuster) as pictured. I would advise that you spread the lower toothed adjuster a bit ...   09-14-2021 07:06 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

...   09-14-2021 07:03 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

Start with the rear/trailing shoe. Slip it onto the emergency brake tab and into the slot on the wheel cylinder piston. ...   09-14-2021 07:02 am

Brakes > Lockheed Brake Shoes Installation (13 replies - 6294 views)

Hopefully, this will make your installation easier & faster. First, we assume you have cleaned the shoes and put a VERY light smearing of brake grease ...   09-14-2021 07:00 am

Brakes > Lockheed Wheel cylinders (9 replies - 4534 views)

Please note the circlip has all 3 tabs fully onto the slot in the wheel cylinder. A little smearing of grease will help slide it ...   09-09-2021 05:46 pm

Brakes > Lockheed Wheel cylinders (9 replies - 4534 views)

...   09-09-2021 05:44 pm

Brakes > Lockheed Wheel cylinders (9 replies - 4534 views)

This a a 12 point 17mm socket that I filed down the end to get the circlip fully engaged onto the slot in the wheel ...   09-09-2021 05:44 pm

Brakes > Lockheed Wheel cylinders (9 replies - 4534 views)

...   09-09-2021 05:43 pm

Brakes > Lockheed Wheel cylinders (9 replies - 4534 views)

...   09-09-2021 05:42 pm

Brakes > Lockheed Wheel cylinders (9 replies - 4534 views)

...   09-09-2021 05:42 pm

Brakes > Lockheed Wheel cylinders (9 replies - 4534 views)

...   09-09-2021 05:42 pm

Brakes > Lockheed Wheel cylinders (9 replies - 4534 views)

...   09-09-2021 05:41 pm

Brakes > Lockheed Wheel cylinders (9 replies - 4534 views)

...   09-09-2021 05:41 pm

Brakes > Lockheed Wheel cylinders (9 replies - 4534 views)

Although this can be quite a chore without the well thought-out plan, here is the way I have been doing it for over 40 years(doesn't ...   09-09-2021 05:40 pm


 Current time is 06:59 pm
 First Page Previous Page  1  2  3  4  5  6  7  8  9  ...  Next Page Last Page


UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems