| ||||
|
Posts by gmgiltd | |
---|---|
168 posts | Showing posts 41-80 of 168 |
Electrical & Instruments > Crazy three fuse box (10 replies - 16653 views) Hi Frank,
I have a total of 16 blade fuses and 4 relays as described below – this is on a GT with fuel injection so ... 10-20-2016 02:04 pm Ignition > Misfire after 30 minutes (31 replies - 45832 views) No idea about reconditioning the gauge or even where you would source parts if they were needed. New ones are availability from Merlin in the ... 06-05-2016 09:35 pm Fuel Stuff > Carbs or Fuel Pump Issues - 2.2L Stroker (20 replies - 33052 views) Again my plumbing is different because I am on fuel injection with low pressure 3psi side and a high pressure 45psi side.
The line from the ... 05-24-2016 07:47 am Fuel Stuff > Carbs or Fuel Pump Issues - 2.2L Stroker (20 replies - 33052 views) Hi Brett,
Its a bit different layout from the GT but I believe the restrictor is to stop fuel being syphoned into the carbs. If ... 05-23-2016 01:29 pm Projects > 18711 "Miss Jensen" (129 replies - 248065 views) ... 05-21-2016 06:28 pm Projects > 18711 "Miss Jensen" (129 replies - 248065 views) I seem to remember that the first few rotors in my car also had a sprung counterweight which was the rev limiter - I haven't ... 05-21-2016 06:28 pm Fuel Stuff > Carbs or Fuel Pump Issues - 2.2L Stroker (20 replies - 33052 views) 4.5 psi at the carb is on the high side 1.5-2.5 is the recommendation if your pressure regulator is adjustable.
Gordon ... 05-21-2016 11:52 am Engine & Transmission > Flywheels (2 replies - 7456 views) I have a question regarding flywheels which I hope someone can help me with - my understanding is that early 907s were fitted with cast ... 05-18-2016 01:29 pm Engine & Transmission > Leaking cam seal (20 replies - 26739 views) Plugging it would be a retrograde step as the breathers in the cambox and crankcase both prevent pressure building up internally. You may just have ... 05-14-2016 06:22 pm Engine & Transmission > Leaking cam seal (20 replies - 26739 views) It's a long shot but make sure the breather hose from the cambox is not restricted or kinked. ... 05-14-2016 05:31 pm Engine & Transmission > Leaking cam seal (20 replies - 26739 views) Other possible causes depending on whether you are still using the standard airbox which is plumbed into the exhaust cam box and creates a slight ... 05-14-2016 10:47 am Body & interior stuff > Tarunk lock spring gadget (6 replies - 9960 views) Frank,
From your description I believe you are looking for a circlip try http://www.centuryspring.com/retaining-rings
Gordon ... 04-15-2016 08:42 am Electrical & Instruments > Lucas Windshield Wiper ID (1 reply - 5459 views) Hi Tim,
Very hard to read properly. Hope this is what you are looking for.
Gordon ... 04-05-2016 02:42 pm Engine & Transmission > Delta 4 into 1 header and steering column question (20 replies - 31102 views) Try Mike Taylor at Lotusbit's or Gary Kemp or possibly QED for the gaskets- Mike should be able to provide a stainless header as well.
Gordon ... 03-29-2016 05:57 pm Electrical & Instruments > Alternator Wiring (9 replies - 18753 views) Wiring for the Lucas alternators should be as below unless Jensen in their wisdom have concocted some variation on the theme - this diagram is ... 03-19-2016 10:12 am Fuel Stuff > Gas fumes in the trunk (9 replies - 20799 views) Hi Frank,
I was trying to point out that the standard nitrile lined hose which most of us use could well be the main contributor to ... 02-12-2016 08:20 am Fuel Stuff > Gas fumes in the trunk (9 replies - 20799 views) Old subject that never seems to go away but I may have come across a potential solution while I was researching suitable fuel hose for ... 02-11-2016 08:29 am Engine & Transmission > Delta 4 into 1 header and steering column question (20 replies - 31102 views) I don't know if Martin Robey have fixed their system or not - you would have to confirm and be aware that the manifold ports ... 01-17-2016 06:50 am Engine & Transmission > driveshaft for W58 5 speed conversion (5 replies - 9284 views) Hi Nigel,
I believe that the reason for the two piece driveshaft is that there is very little lateral support at the back of the Getrag ... 12-23-2015 08:20 pm Brakes > Master Cylinder (4 replies - 9155 views) Hi Kurt,
This could be a solution for your problem
https://www.merlinmotorsport.co.uk/p/girling-reservoir-extension-gmc-rex
Alternatively you could go for a remote reservoir which if the TR6 one has 7mm push in ... 10-27-2015 07:22 pm Projects > More "bling" for the Jensen Healey (18 replies - 66476 views) Hi Nigel,
My GT never had the chrome on the rear edge of the bonnet, but I added some of the door edge strip to the ... 10-27-2015 10:38 am Engine & Transmission > Oil Cooler hoses (11 replies - 15959 views) Hi Joachim, Could be wrong here but it would seem that the only problem with the integrated oilstat is that it does not permit the ... 10-27-2015 07:54 am Engine & Transmission > Timing Belt Noise (6 replies - 10988 views) There's a difference between belt whine and a loud squeaking noise which could easily come from the water pump or alternator. I would suggest you ... 09-01-2015 08:58 pm Electrical & Instruments > Handling (6 replies - 10651 views) Has anyone ever looked up "automotive handling " in Wikipedia and read the somewhat slanderous comments about the Jensen GT.?
It would appear that the author ... 08-12-2015 04:38 pm Engine & Transmission > Urgent advice request (12 replies - 18761 views) Hi Nigel,
I was not aware that there are more than one version of the Jensen dellorto air box, live and learn.
One thing I didn't mention ... 07-28-2015 04:44 pm Engine & Transmission > Urgent advice request (12 replies - 18761 views) Hi Nigel,
My engine when last dynoed was giving 205 but has had several updates since then including fuel injection, crank fired ignition, éclat air box, ... 07-27-2015 08:05 pm Cooling > Squealing (2 replies - 8167 views) Have you tried running it (briefly) without the fan belt - that would eliminate the belt, the alternator and the water pump if the squealing ... 06-27-2015 05:38 pm Carburetors > DHLA 45s possibly boiling? (21 replies - 36683 views) Hi Tim,
I have been running the Jenvey 48 TBs with good results for the past couple of years. I got the kit from Mike Taylor ... 06-21-2015 07:18 am Carburetors > DHLA 45s possibly boiling? (21 replies - 36683 views) You should be able to cook up a stealth solution with these inside an Eclat airbox - http://www.jenvey.co.uk/products2/twin-throttle-bodies/dcoe-throttle-body-30mm-long/ts-body-40-50mm-pair-tspxxi
Add the CTI of your choice - problem ... 06-18-2015 10:45 pm Cooling > Squeeling noise at start-up (1 reply - 6470 views) Make sure the pulley on the new alternator is the same section as the old one and the fan belt is the same size (width) ... 06-14-2015 07:28 pm Carburetors > DHLA 45s possibly boiling? (21 replies - 36683 views) Hi Joachim,
I was at Lotusbit's yesterday and talked to Mike Taylor regarding your hunt to find a stealth EFI system. I understand he is working ... 06-13-2015 06:53 am Brakes > Lockheed handbrake not quite holding (9 replies - 17427 views) Another item to check is the equaliser assembly in the middle - if not free and greased the pins can wear and bind slightly. There ... 06-13-2015 06:34 am Body & interior stuff > Mud flaps (2 replies - 6465 views) Hi Stu,
I'm pretty sure that they were never available from the factory in fact I have never seen mud flaps fitted to a JH. I ... 05-21-2015 08:27 am Cooling > fan clutch (18 replies - 29447 views) That could explain it - my GT never had AC. Do you know if there was any rule of thumb regarding the fitting of cross ... 05-05-2015 03:45 pm Accessories > Jensen GT steering wheel (5 replies - 13744 views) Hi Frank - I appreciate this is not what you are looking for but I was in the same position a few years back and ... 05-05-2015 10:47 am Suspension > Rear wheel bearing housing diameter, GT? (2 replies - 7261 views) Hi Joachim,
If I understand you correctly the measurement is 71mm taken with a vernier calliper.
Gordon ... 05-03-2015 08:58 am Engine & Transmission > Exhaust Header Removal and Cam Covers (15 replies - 55366 views) Hi Roland,
No idea who you got the exhaust from but it's not in the standard configuration which was two 1.75" pipes over the axle. Mines ... 04-27-2015 02:19 pm Electrical & Instruments > Hazard Lights (12 replies - 26568 views) A few possibilities for the extra wires in the trunk of a JH as opposed to a GT.
Rear screen heater
Rear window washer pump
Rear wiper
Switch for ... 04-04-2015 02:13 pm Engine & Transmission > Delta 4 into 1 header and steering column question (20 replies - 31102 views) Hi Ken,
It's the header that I am talking about - it would not physically fit because one pipe was where it should be but the ... 04-04-2015 01:02 am Engine & Transmission > Delta 4 into 1 header and steering column question (20 replies - 31102 views) Just a word of warning about the Martin Robey stainless header - the standard of workmanship one I got from them last year was absolutely ... 04-04-2015 12:09 am | |
Current time is 03:35 am | 1 2 3 4 5 |