This is sooooo cool!!  Well worth watching for those JH'ers who are curious. Thanks for posting. Lash ...   10-16-2010 12:56 pm

I could be wrong but I think the JHPS was the only place that carried the Bilstiens.  I think Greg had aspecial set designed.  I'd try the ...   06-22-2010 10:40 am

Hi Art,   I could be wrong but I believe that the rotors are not recommended for re-turning, not sure why.  Having said this I have ...   06-15-2010 12:48 pm

Hi Joachim,      Whenever I've changed the gear lube in the tranny (both 4 and 5 speeds) I've had the same experience.  It is surprising that ...   05-14-2010 11:52 am

You guys in SoCal are so lucky.  I'd love to go on this.  Anyone with a running JH (or with any car as Greg mentions) ...   02-07-2010 01:29 pm

Hi Dakota,      I'm a JHPS member living in Franktown, just down the road from you.  Give me a call as I might have a spare ...   11-24-2009 02:08 am

Steve,      This is genious at its purest and simplest form.  I've never thought of this, should work not only for oil changes (getting old oil ...   12-10-2008 02:40 pm

Hi Ross,     I've had this problem a couple of times.  The brass plug will only get worse as time goes by.  It was a while ...   12-01-2008 11:04 pm

Jody,      I like the sleeping bag idea, I can lay comfortably untill the chiropractor arrives.  Kidding aside, I think I'll do this as I have ...   06-27-2008 11:40 am

Thanks Joel,      The Lotus position, I can relate.  I dread working under the dash, my back hurts for days.  I'll follow the purple wire back ...   06-26-2008 12:50 pm

Thanks Bob,      I think cleaning out the fusebox and all the electrical connections is a good place to start, after all that was the solution ...   06-25-2008 12:14 pm

Thanks Brett,      I don't have anything like that, maybe because your car is a JH-5 or possibly a previous PO addition.  Mine is a '74 ...   06-23-2008 10:21 pm

Hello All,      I was so content that I had solved my ISBWM problems that I thought I'd tackle puting in a CD player in the ...   06-23-2008 11:53 am

     I've noticed there were allot of people reading this thread so I thought I'd update what has happened with the dreaded ISBWM caper.  After ...   06-16-2008 01:11 pm

Hi Dale,      I just finished the project you are getting into, replacing the visors.  The screws you are missing are (button cap screw #10 - ...   06-16-2008 01:02 pm

Hi Colin,      Follow up question.  After jumping the wires from 11 to 12 do I re insert the wire bundle back into the ISBWM?  I ...   06-10-2008 10:47 pm

Thanks Colin,      This sounds pretty straight forward.  I will do this tonight and let you know how it goes.  Much appreciated. Lash ...   06-10-2008 01:23 pm

Hello all,      I've been researching this a bit and I've found threads about when the key is put in the ignition and the fuel pump ...   06-09-2008 11:20 pm

Hi Mark,      I'm having the exact same problem as George.  When I turn the ignition key the familiar click-click-click of the fuel pump is not ...   06-07-2008 10:44 pm

Hi Ross,      I removed the header from the bottom of the car.  If you had to jack up one side of the engine to get ...   05-21-2008 12:27 pm

Hi Ross,      Welcome to the club!!!  On a cold compression test I am getting between 113 and 120 with a low mileage, stock "plain Jane" ...   05-21-2008 12:19 pm

     On my car it runs through the firewall directly beside the foot pedal box.  If you look at the firewall (engine side) directly to ...   05-01-2008 07:31 pm

UPDATE,      Mobil 1 Synthetic 75-90 put in, works great.  A little quieter than 20-50 and able to manage all gears "crunchless" as long as I'm ...   05-01-2008 12:17 am

Thanks Brett and Greg,      This makes sense and I'll switch out to the synthetic 75-90.  The reason I even tried the 20-50 was from a ...   04-30-2008 05:02 pm

Hello all,      After I did a five speed (Getrag) conversion I started running with 75-90 weight lube but found the shift up to second could ...   04-30-2008 03:25 pm

Hi Pete,      Thanks for the reply, I've looked at your collection of JH upgrades and I may need to take you up on some of ...   07-21-2007 12:45 am

Hi Ron,      Went through your entire portfolio of phots, kudos to you man, you have done a very impressive job with your race car!!!!  Can't ...   07-21-2007 12:41 am

     Thanks Ron, why did you need a different mount, was the GM one better or more available?  Is there a GM part # (I'm ...   07-18-2007 10:31 am

    First posting, I thought I'd jump in.  I am at the near end of a conversion from the 4 speed to the 5 speed ...   07-18-2007 12:41 am