My factory hardtop attaches without removing the rolled-up soft top, no problem.  I can't say about the other hard tops, but I remember test-driving a ...   10-07-2006 10:27 pm

Ron, Where did you buy the valve for your heater hose?  An auto parts shop?  A hardware store?  I just want an idea where I ...   10-07-2006 10:24 pm

Where would folks suggest as the best place to buy a cable release/ electric release? ...   10-07-2006 10:21 pm

If you want to restore the car, take your time and do it right.  Keep her inside, of course!  Tear her completely down and have ...   09-19-2006 01:01 pm

The under-seat switch is a grey disc.  At least, it was in my JH when I pulled it out earlier this summer.  It was duct-taped ...   09-11-2006 12:54 pm

Mike, if you have the stock 185/70HR13 tires, the circumference of the tire should be about 6 feet.  At 60 mph, you're going ~90 feet ...   09-05-2006 05:05 pm

For the crank, you should be able to measure the stroke length and compare it to the stats for the 2.0 and 2.2.  Let's see... ...   08-31-2006 11:46 pm

Ron, Let's meet up for lunch sometime soon.  Thursdays will probably work best for me.  Email me off the list:  edward_davis@yahoo.com Thanks, Edward ...   08-29-2006 03:34 pm

Has anyone seen/used Delta's conversion kit for the vacuum valve in the heater line?  My heater is out of the system right now because of ...   08-21-2006 11:04 pm

Joel wrote: I LOVE the Dells.  If for nothing but the wonderful sound that they make. . . . . I've heard several folks wax poetic ...   08-21-2006 10:53 pm

Ron, would you care to share the fine points you missed?  I want to spend several years reading and learning about these engines before I ...   08-18-2006 11:38 pm

Discovered a leak or two in my exhaust when I had to get my NC inspection today.  Does anyone know of a good muffler shop ...   08-17-2006 01:14 am

Al, Why don't you send some pictures of the car to the list so we can see what shape it's in?  It may be that you ...   08-07-2006 06:43 pm

I remember reading somewhere thet the 9xx slant fours were meant as a precursor to a V-8, but that eight was never built.  But that ...   07-18-2006 05:15 am

I've seen two very different estimates of the JH's weight.  One lists her at ~2100 lbs, while the other lists her at a more robust ...   07-12-2006 05:16 am

This post is often rusted and difficult to move, like Jim wrote.  To get my dash pod out, I had to take out the speedo ...   07-11-2006 04:51 am

Replacing those fuel lines could have freed up some gunk in the fuel system that stopped up your float valves, keeping them from sealing.  It ...   07-04-2006 06:37 am

I have to agree with Mark's assessment.  I had a similar problem that was a result of my old pump alternately having no pressure and ...   07-01-2006 06:04 pm

I for one would like to hear about an EFI conversion for the JH.  I love carburetors, but as time passes there are more tools ...   06-07-2006 11:29 pm

I've put up my pictures of the JH's from Dixon 2006 in the JHPPG.  I know other folks got better pictures, so put them on ...   05-31-2006 12:43 am

Like Kurt said, the show was great, and there were actually six JH's as well as the GT!  Thanks to all of the great Jensen ...   05-27-2006 03:39 pm

I want to change the timing belt on my 74 JH, and I have a belt that I got with the car last year.  That belt ...   05-26-2006 02:34 pm

Looks like I'll just have to use the rev limiter between my ears.  Previous inspection of the rotor in my JH indicated it was the ...   05-12-2006 10:49 pm

I'm also getting very little heat from my heater core, but that's not as big a problem here in CA.  My problem is that I ...   05-12-2006 08:56 pm

I was looking at John Kimbrough's website, which has a copy of the JH owner's manual (missing from my car).  Anyway, that manual said that ...   05-12-2006 08:44 pm

What's wrong with Tangerine? =) ...   05-11-2006 11:38 pm

Thanks, Dan!  That's just what I was looking for. ...   05-11-2006 11:33 pm

I see some cool work being done on this car, but I'm confused about the racing regs.  You're allowed to change out the radiator, but ...   05-08-2006 05:17 am

Does anyone have the Jensen or JH logos as image files I could use to make iron-ons?  I want to be able to make a ...   05-03-2006 10:20 pm

Aha!  I misunderstood what the folks at Delta meant!  When they said there were only brake and clutch rubber pads, I thought that they meant the gas pedal ...   05-03-2006 03:40 pm

Delta says that the gas pedal rubber is NLA.  Is there any substitute, or do I just have to have a bare metal pedal? ...   05-03-2006 02:13 am

Last time I changed the oil, I put in the amount that seemed to be indicated by the tech manual, but she was overfull afterwards.  ...   05-03-2006 02:10 am

Seriously, though.  If you do get this stereo, I want to see some pictures.  I don't think we should be ageist with regard to bling.  ...   04-29-2006 04:29 pm

Two quick questions:  I've heard that the club magazine did a series on installing the Delta seat covers a while back.  When was that, and ...   04-20-2006 03:25 am

My car has a Jensen Sound system, too.  Powered by Lotus... ...   04-14-2006 05:07 am

Has anyone actually made a FI JH?  I could see the possibility, with aftermarket kits designed for Webers, but I didn't know anyone had actually ...   03-30-2006 03:54 pm

Does anyone know of a place where I can get touch-up paint for my tangerine 1974 JH? Thanks, Edward Davis ...   03-28-2006 08:23 pm

Howdy, Do any of you know of a good set of fabric seat covers that fit the stock JH seats?  My vinyl is very worn and ...   03-18-2006 07:29 pm

Does anyone know the size/ type of screw that holds the vacuum switch to the rear Stromberg carb?  Mine is held on with bailing wire, and ...   02-08-2006 08:49 pm

Well, it all seems to work.  Once again, the club has saved me money while providing me with good guidance for tinkering.  Thanks, everyone! ...   02-06-2006 05:08 pm