Hi Steve, I sent you a PM with a lot of details, but bottom line is that I think someone switched Pivot - Release Lever on ...   08-25-2007 03:23 am

Steve, Where can I find a table of values for sF ?  It's not in any of my engineering reference material, and nowhere to be found on ...   08-21-2007 06:47 pm

Steve, Not sure what dimension you are looking for "face of the bell housing to the second lock nut?" As Greg tells it, there are only two ...   08-21-2007 06:21 pm

Is the 912 the motor version that interferes with the Chassis Rails? I'm quite happy with my tricked out 907............ Good stuff, no matter what the source, ...   07-20-2007 04:42 am

I don't know the details of the offering, but would it not be easier just to get the Toyota 5spd from the Club Store and ...   07-20-2007 04:38 am

Lash, Sure, the 5spd pattern is about 4 inches away from the 4spd bolts.  I did this three years ago, and just added bolts in the ...   07-20-2007 02:49 am

Jon, If you are only on the street, a 2qt should be OK.  If racing, go with the 3qt. Do not get a manual turn-on valve !  Get ...   05-19-2007 08:45 pm

Jon, I put one in YELODOG when I built it up about 12 years ago.  Accusump will save your engine ! Pix below show some of the ...   05-19-2007 03:03 am

Ron, There's still time to sign up forTarga.  What's holding you back??????? No, I don't want to be unfair about the JH.  I'm sure that I could ...   05-05-2007 02:23 pm

Like I said, too many rules.  I would just cheat, and never use a two piece Driveshaft. I would cheat on the strength of the Universal ...   05-04-2007 04:47 am

Yo, I'm not an SCCA guy, but it really seems very strange to me that they will not allow a strictly SAFETY item like a HOOP.  ...   05-04-2007 01:30 am

I'm finally getting around to registering.  Looks like it's going to be a great event. http://www.jenseneast07.org/ The location is about 85 miles from Summit Point Raceway and ...   04-12-2007 03:12 pm

Greg etal, Well, as I've said earlier, it took me a very long time to sort out the Weber jetting.......   Reminder that YELODOG is a 2.2l, ...   04-06-2007 07:40 pm

Arvin, I use a set of 45's on my JH.  Took me about 3 years of putzing to get the jets correct, and now it runs ...   04-03-2007 08:11 pm

Phil, I sent you a PM - look for it.  May help solve your problems. Pete PETE'S KITS ...   04-03-2007 04:11 am

Judson, I tried Hawk Blue on the Neon in Targa Newfoundland this year and had to change Rotors twice in 400 miles of hard racing.  Perhaps they ...   03-29-2007 03:44 pm

Judson, Glad you had such a good track experience. FWIW, the brake setup on YELODOG is stock except for the following: 1 - Removed splash shields from the ...   03-29-2007 06:05 am

Hi Ron, Just getting to look at the various JH posts and saw the dreadful results of your day at VIR.  Sorry for your troubles. For agressive ...   03-29-2007 05:28 am

OK, here's my data: JH 1110/16703 (YELODOG):  45,000 miles.  Excellent condition.  Original engine was replaced by me with a Richard Reyman built 2.2L.  I purchased car ...   12-24-2006 07:40 pm

Jon, Exactly correct - Speedo cable needed.  I did mine two years ago, and didn't look up the details. Pete ...   07-22-2006 06:39 pm

Frank, All the responses are quite correct. My opinion is that you should install both the 5spd Tranny and Rear.  You'll get lower rpms at highway driving ...   07-21-2006 03:26 am

I'm only yanking your chain about the time - I don't know the track.  What venue will you be racing in? Yeah, I recall taking a ...   06-01-2006 08:05 pm

Sure Ron, BOOM is no good.  I'm sure you now have an Accusump. Actually, I don't have overheating problems.  Use 19 row oil cooler, no Shroud ...   06-01-2006 04:00 pm

Harkes, yes, we agree.  I didn't see your earlier posts on the subject.  You should not have any problems for street/road use.  For track, get ...   06-01-2006 01:39 am

FWIW, my experience with YELODOG, which has:  11.1 Compression Ratio, 2.2 L, Electromotive (crank-fire ignition), larger Oil Cooler & other stuff is noted below. I have a ...   05-31-2006 03:31 am

I can't say enough for the HTD system.  Have many track miles at very high rpm, and no problems.  Probable cost now would be in ...   05-21-2006 04:33 am

Judson, are you certain that the setup you describe was "stock"?  I've never heard this before. My '74 has a stock hole behind the catch-can, where my ...   04-24-2006 12:47 am

Yeah John, the parts come from two different Lotus boxes - I'd have to look up the cars they belong to. If anyone needs this info, ...   04-23-2006 04:13 am

I used a collection of Lotus airboxes with integral filter.  Still has room for the velocity stacks inside. My hose goes down and forward through the ...   04-23-2006 12:48 am

John, Don't know which carbs you're referring to. I have forward intake pipe on my Webers - see: http://jhppg.com/gallery/album62 Pete ...   04-22-2006 11:44 pm

Jim, Actually, I bought the Delta kit and not sure at this time if I used any of the parts.  The kit didn't address any of the ...   03-22-2006 02:01 am

Looks like colinw59 is on the right track.  There are about 1500 folks patiently waiting for the production run of the Gaiter, me included. Thanks for your ...   03-21-2006 03:34 pm

Well, you guys are getting into most, or all, the issues I went through a few years ago.  For the record, I found the most ...   03-21-2006 03:28 pm

John, I went through the Damper issue last year and found a solution.  I firmly believe that you need a Damper, else why would the Jensen ...   11-20-2005 05:31 am

Edward, Don't know if this will help, but I put a great air cleaner on YELODOG a few years ago using Lotus airbox parts.  I have ...   11-20-2005 05:22 am

Norm, I've gone through the 5spd conversion.  Check:http://www.jhppg.com/peteskits.htm for two items that may help you. Pete ...   11-20-2005 05:17 am

Ron, I did this conversion to YELODOG last year. The Tranny mount Crossmembers are the same. This Tranny mounting Plate that goes under the tunnel must be moved.  ...   06-21-2005 07:37 pm

George wrote: What’s with all the question marks? George   Cat stepped on my keyboard.   ...   05-28-2005 03:02 am

George, Did the Delta kit solve your problem??????????? Pete ...   05-23-2005 11:51 pm

Erik, you will be very happy with the mods you've made to your JH.  I've done similiar a few years ago, and am thrilled each time ...   05-09-2005 03:42 am