I,m intrested. What about lug nuts? Will they sell a steel lug nut to go with the wheel? PK -18849 ...   08-04-2005 03:36 am

Brought the sway bars kits Delta and I'am in the process of installing the front.  The length of the arms on my bar is about ...   07-14-2005 02:04 am

Do you have any recommendations as to what brand works well in a JH, as far as after market mechanical oil pressure gauges go. I ...   07-12-2005 01:42 am

Jim, Could you have a slow/small leak of oil from the exhaust cam cover, dripping oil onto the header? When the engine temp gets hot enough, ...   06-27-2005 03:30 am

Looks great Ron. Just wondering about the placement of the oil fill on the front of the intake side cam cover. Does it really matter? ...   06-17-2005 02:40 am

With the recent change of exhaust header, the harmony of the engine was displaced, resulting in moving hoses etc. to get at exhaust flage. After ...   06-12-2005 03:53 pm

Thanks to all for your timely advice. Delta had in stock. ...   06-06-2005 11:26 pm

Thanks Mike - what I need is the transmission fill plug, and not the oil drain plug. ...   06-06-2005 01:07 pm

I have managed to mangle my transmission fill plug, trying to remove with vice grips, as the corners were rounded, and would not turn with ...   06-06-2005 02:44 am

Thanks guys for your help. ...   05-17-2005 06:06 pm

After replacing the transmission mount, I decided to drain the fluid and replace with new. The shop text says to add 1.98L , using the ...   05-17-2005 04:14 am

I would be intrested in joining the caravan to the MEET. I'll look for posted date and meeting place. ...   05-13-2005 03:13 am

Mark, Have you put in the shims or a bushing around each mounting bolt yet? I think this would give you the correct hight, and not ...   05-12-2005 02:46 am

Has anyone had any experience, good or bad, in fixing the windscreen washer bottle motor? Is there a suitable replacement? TIA Paul Koehler-18849 ...   04-22-2005 11:20 am