Home 

 Moderated by: Greg Fletcher  
AuthorPost
GCTate
Member


Joined: 12-10-2007
Location: Calgary, Alberta Canada
Posts: 6
Status: 
Offline
Hello everyone...I am a new JH owner, very excited about being the proud owner of 17184.  Can anyone assist with how to remove the console so as to access the parking brake adjustment?

Thanks for your help.

Gordon

Art DeKneef
Member
 

Joined: 03-12-2005
Location: Mesa, Arizona USA
Posts: 298
Status: 
Offline
You shouldn't have to remove the console to adjust the parking brake.

To remove the console there are 2 small screws at the very back under the carpet. They are hidden until you move the carpet an might be rusted. Theother screws are located by the shift lever. On mine I had to lift up at the back and then pull towards the rear of thecar for it to come out.

The parking brake cable and adjustment is under the car. The cable comes from the hand brake from inside the tunnel and goes through part of a frame rail and attaches to a clip on the rear drivers side brake. There is a threaded rod that this clip screws onto.

GCTate
Member


Joined: 12-10-2007
Location: Calgary, Alberta Canada
Posts: 6
Status: 
Offline
Thanks so much for your response...I am pretty new at this, so I appreciate your help.

 

Gordon



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems