Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Horn button  Rate Topic 
AuthorPost
 Posted: 10-18-2007 01:28 am
  PM Quote Reply
1st Post
Daryl
Member
 

Joined: 04-10-2005
Location:  
Posts: 4
Status: 
Offline
Hello Everyone,

It's been a few years since I played with my 74 Jensen Healey.  The horn isn't working. No power to the horn. The last time I fixed it  the problem was in the push button on the turn signal arm. I am using a small screw driver to try and pry out the round button on the end of the arm but it's not comming out! Am I doing something wrong? The button does have to come out to get it apart right?? If so should I drill it out? Can I buy a new one or do I end up replacing the whole arm assembly?

Back To Top PM Quote Reply  

 Posted: 10-18-2007 01:47 am
  PM Quote Reply
2nd Post
Chris E
Member
 

Joined: 11-23-2006
Location: Fremont, California USA
Posts: 12
Status: 
Offline
 I did the same thing a while back & finally discovered that they unscrew.

 

Chris

Back To Top PM Quote Reply

 Posted: 10-18-2007 02:02 am
  PM Quote Reply
3rd Post
Daryl
Member
 

Joined: 04-10-2005
Location:  
Posts: 4
Status: 
Offline
Yes, of coarse!! Thanks Chris

Daryl

Back To Top PM Quote Reply  

Current time is 05:23 pm  
> Jensen Healey & Jensen GT Tech > Electrical & Instruments > Horn button Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems