Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Manifold  Rate Topic 
AuthorPost
 Posted: 05-10-2007 05:28 pm
  PM Quote Reply
1st Post
j23mau
Member


Joined: 03-13-2005
Location: Monmouth, Illinois USA
Posts: 33
Status: 
Offline
I got my manifold today.  Is it fairly common to have to drill out the holes that connect the carbs to the manifold.  It looks like the bolt holes are smaller than the manifold.  My eduacted guess is that he retapped the holes to fit a different size bolt.  Just curious if anyone else has run into this problem.

Thanks Jeremy

Back To Top PM Quote Reply  

 Posted: 05-11-2007 04:39 pm
  PM Quote Reply
2nd Post
Greg Fletcher
Administrator


Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 430
Status: 
Offline
I haven't seen that before, so I'd say it's not common, but owners do weird things all the time. The original mounting studs are almost impossible to find (I assume you're talking about a Euro manifold) - the size is very odd, mixed metric deal. Similair sized studs with a standard thread to replace them are easy to get, so it might be worth changing them.

Back To Top PM Quote Reply

 Posted: 05-13-2007 05:41 pm
  PM Quote Reply
3rd Post
Ron Mau
Member
 

Joined: 03-14-2005
Location: Davenport, Iowa USA
Posts: 61
Status: 
Offline
Got that figured out Gregg, thanks.

Next question is, I had 2 fittings come with the manifold.  One of course is the brass one, but there is a black plastic one that fits on the other side.  Does the engine side need to be plugged?

Thanks

Jeremy Mau (on my dad computer and he didn't change the locks!!!!)

Back To Top PM Quote Reply  

 Posted: 05-14-2007 04:50 am
  PM Quote Reply
4th Post
Greg Fletcher
Administrator


Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 430
Status: 
Offline
The plug on the front should be metal, not plastic! The brass elbow at the back wil connect to the hose that runs to the brake booster.

Back To Top PM Quote Reply

Current time is 02:57 pm  
> Jensen Healey & Jensen GT Tech > Carburetors > Manifold Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems