Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Under dash metel to metal Rattle

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Under dash metel to metal Rattle  Rate Topic 
AuthorPost
 Posted: 04-09-2007 04:35 pm
  PM Quote Reply
1st Post
jgreen
Member
 

Joined: 01-28-2007
Location:  
Posts: 58
Status: 
Offline
I am experiencing a" tinny" under the dashboard rattle when running over small bumps in the road.  It may be something is very well loose but I am not sure where to start short of removing the entire dashboard ( oh, it may come to that as it is annoying). It seems to be coming from underneath  the center of the dash. Any help on what could be loose would be appreciated.....  

Thank You

John

Back To Top PM Quote Reply  

 Posted: 04-10-2007 12:25 am
  PM Quote Reply
2nd Post
Greg Fletcher
Administrator


Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 421
Status: 
Offline
There actually isn't all that much under the dash that typically would come loose- my guess would be the so-called air vents in the firewall. These are controlled by rods on either side of the transmission tunnel. They come with some goofy foam mterial on the edge that contacts the firewall, but that stuff falls off over of the years and can make noise over bumps.

Back To Top PM Quote Reply

Current time is 10:05 pm  
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Under dash metel to metal Rattle Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems