Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Electrical & Instruments > Ignition Switch replacement

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Ignition Switch replacement  Rate Topic 
AuthorPost
 Posted: 04-05-2007 01:16 am
  PM Quote Reply
1st Post
Dave Sollish
Member
 

Joined: 02-03-2006
Location: West Suffield
Posts: 12
Status: 
Offline
    My ignition switch has failed so I need to come up with a fix. Does anyone know if the MGB switch  & lock assembly part #319-120 from http://www.thebhive.com work?

Back To Top PM Quote Reply  

 Posted: 04-05-2007 03:20 am
  PM Quote Reply
2nd Post
Mark Rosenbaum
Member


Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
I don't think this would work.  The MG part might perhaps fit mechanically, but it seems to lack the steering lock mechanism and release button.  Also, you'd have to replace its electrical connector with one compatible with the JH wiring.  Finally, there is no connector for the wire to the key-in-ignition warning connector.

On a side note, you might want to remove what looks to be your home address from the 'homepage' line in your profile.

Back To Top PM Quote Reply

Current time is 10:56 am  
> Jensen Healey & Jensen GT Tech > Electrical & Instruments > Ignition Switch replacement Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems