Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Suspension > 1972-1975 rear wheel bearing

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
1972-1975 rear wheel bearing  Rating:  Rating
AuthorPost
 Posted: 08-17-2006 02:44 am
  PM Quote Reply
1st Post
mule
Member
 

Joined: 08-16-2006
Location:  
Posts: 3
Status: 
Offline
 Does anyone have a picture of the rear wheel bearing kit that fits 1972-1975 Jensen Healey?  Timken and BCA use the same part number, i.e. RW109R.  I saw one many years ago and remember the kit included a bearing, backing plate, and lock ring, but I'm trying to remember if there was anything else included.

Thanks.
Back To Top PM Quote Reply  

 Posted: 08-18-2006 12:48 am
  PM Quote Reply
2nd Post
Mark Rosenbaum
Member


Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
 For what it's worth, attached is a photo of what is supposed to be the QH bearing kit.  I have not personally examined the parts in question and therefore can not vouch for their correctness.

Attachment: Brg set #2 QWB149C.jpg (Downloaded 112 times)

Last edited on 08-18-2006 12:49 am by Mark Rosenbaum
Back To Top PM Quote Reply

 Posted: 08-18-2006 01:52 am
  PM Quote Reply
3rd Post
mule
Member
 

Joined: 08-16-2006
Location:  
Posts: 3
Status: 
Offline
 Thanks for your quick reply and picture, Mark.

I now believe I was mistaken in saying that the Timken and BCA part number RW109R include a backing plate.  I think Green Ball Bearing used to make the backing plate for RW109R, but I don't remember their part number for it.

I didn't notice a backing plate in your picture, Mark.  Maybe the '72-75 Healey doesn't require it...?

In any event, Timken has a part number RP109, and I think this is the item I'd like to see pictured.  What I saw years ago was from a distributor that packed RW109R and RP109 together, selling it as a kit.  I'm still trying to remember if there is any hardware that goes with it, or if it was just the bearing, lock ring, and backing plate....
Back To Top PM Quote Reply  

 Posted: 08-18-2006 02:54 am
  PM Quote Reply
4th Post
Mark Rosenbaum
Member


Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
 Attached is a modified factory parts drawing showing the parts in question.  Naturally, each axle requires a full set of them.  The highlighted items are:
  • 35 -- Bearing (usually provided with items 36 and 37)
  • 36 -- O-ring
  • 37 -- Bearing retaining ring
  • 38 -- Bearing retaining plate
  • 39 -- Gasket
It should be fairly clear that the bearing is located internally by ring 37 and secured by plate 38 (which is generally re-usable).  Oil sealing is accomplished by o-ring 36 and gasket 39.  Note that the bearing is a press-fit on the axle and that a large press is generally required for its removal.

Attachment: Rear axle bearings.jpg (Downloaded 81 times)
Back To Top PM Quote Reply

 Posted: 08-18-2006 04:01 am
  PM Quote Reply
5th Post
mule
Member
 

Joined: 08-16-2006
Location:  
Posts: 3
Status: 
Offline
 Great drawing, Mark!  I found it--together with your information that the retaining plate is generally reusable--even more helpful than your original picture.

I wondered why some aftermarket distributors neglect to offer the plate, or as in Timken's case, sell the plate separately.

Thanks a lot for the benefit of your knowledge and the promptness with which you shared it.
Back To Top PM Quote Reply  

Current time is 05:59 pm  
> Jensen Healey & Jensen GT Tech > Suspension > 1972-1975 rear wheel bearing Top


UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems