Home 
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Interior door handle screw

 Moderated by: Greg Fletcher  
AuthorPost
andrewo
Member
 

Joined: 06-01-2005
Location: San Diego, California USA
Posts: 51
Status: 
Offline
Anyone know the size? I apparently lost the passenger side screw, and the driver's door is already put together with the armrest. The armrest was enough of a pain that I hate to take it off to get to the screw. Looks like an M6, but I can't thread my standard M6s for some reason. Thread must be odd.

colinw59
Member


Joined: 02-14-2006
Location: Bloomfield/Hebron, Connecticut USA
Posts: 147
Status: 
Offline
If you mean the interior door handle, the screw for which is located behind the armrest (which must come out to install this handle), I believe that it is either 3/16"  or 1/4" UNF.

FYI all of the threads on the JH are standard, of which most are UNF, the exception being the Lotus engine, which is all metric.

http://jhppg.com/gallery/74-Jensen-Healey-15851



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems