Home 

 Moderated by: Greg Fletcher  
AuthorPost
Thomas Thomson
Member
 

Joined: 02-08-2006
Location:  
Posts: 7
Status: 
Offline
Hey race car guys:

  Where is the best place to mount a roll bar?  I can't find anything heavy enuf to instill confidence.

                       Tom 

Pat Connor
Member


Joined: 03-12-2005
Location: San Dimas, California USA
Posts: 21
Status: 
Offline
All possible mounting spots are in sheet metal.  The proper way to mount the rollbar is with 1/8" plates on the underside to spread the load as wide as possible.

Judson Manning
Member


Joined: 03-14-2005
Location: Atlanta, Georgia USA
Posts: 406
Status: 
Offline
Check your sacntioning body for specific rules.  Me thinks SCCA may require 3/16" backing-plates.  Alternatively, weld-in 3/16" stock and create a 'box' between the floorboard and vertical surfaces.  This will provide ample distribution area.



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems