Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Ignition > How do you bypass the seat belt electrical system?

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
How do you bypass the seat belt electrical system?  Rate Topic 
AuthorPost
 Posted: 03-26-2005 08:24 am
  PM Quote Reply
1st Post
Tim Murphy
Member


Joined: 03-22-2005
Location: Huntington Beach , California USA
Posts: 95
Status: 
Offline

How do you bypass the seat belt electrical system?

There is a round, multi-holed socket that I believe is part of the seat belt warning system. If I remember correctly, the system can be bypassed by connecting a jumper between two of the numbered female sockets. What are the numbers of the sockets that are connected together?

Also, are the seat belt wires on the floorboards that normally are under the seats left separated and taped up or are they connected together?

The previous owner had modified the whole starter/ignition system in order to bypass the seat belt system. I now need to get it back to a stock but functioning form.

Thanks, Tim Murphy 74JH 17303

Back To Top PM Quote Reply  

 Posted: 03-26-2005 02:11 pm
  PM Quote Reply
2nd Post
Mark Rosenbaum
Member


Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
The simplest way of altering things so the infamous seat belt interlock module won't keep your car from starting is to connect together pins 11 and 12 on the round connector.  This connects the START position of the ignition switch to the coil of the starting relay.  Then, when the ignition switch is turned to the START  position, the relay energizes and connects +12 volts to the starter solenoid, which powers up the starter so it can crank the engine.

As far as the seat belt and seat bottom switches are concerned, for US cars, these are wired up as shown in the Delta Motorsports wiring diagram.  The driver's and passenger's door switches, and the parking brake switch, are also connected to the module, so you may have a fair amount of work ahead of you.

 

Back To Top PM Quote Reply

Current time is 02:01 pm  
> Jensen Healey & Jensen GT Tech > Ignition > How do you bypass the seat belt electrical system? Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems