Home 

 Moderated by: Greg Fletcher  
AuthorPost
colinw59
Member


Joined: 02-14-2006
Location: Bloomfield/Hebron, Connecticut USA
Posts: 147
Status: 
Offline
Can anyone tell me what the small green light is for that sits at the 2 o'clock position in the recess for the oil pressure gauge? It stays on while the car is running.

Jim Sohl
Member
 

Joined: 03-26-2005
Location: Chandler, Arizona USA
Posts: 39
Status: 
Offline
Opinions differ, but the story I have heard (or read on the old board) is that the light is a Department of Transportation safety requirement, or in reality, Jensen's response to a regulation, that being to illuminate the steering column lock.  Kind of klutzy if true, but I've seen worse.

colinw59
Member


Joined: 02-14-2006
Location: Bloomfield/Hebron, Connecticut USA
Posts: 147
Status: 
Offline
This must only apply to right hand drive cars as it's on the wrong side in this country. Thanks.

Greg Fletcher
Administrator


Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 430
Status: 
Offline
This topic was discussed at lenght at a recent club meeting: Green Light On: means Jensen is on and working.

Mark Rosenbaum
Member


Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
While Greg's explanation certainly is a charming one, Jim's explanation is closer to the truth.  In fact it is present to satisfy a US National Highway Traffic Safety Administration requirement to illuminate the Hazard switch.  I've seen a copy of the regulation, courtesy of Jensen owner Bill Spohn ( WSpohn4@aol.com ).

If memory serves (and assuming that I've read the parts list correctly), for European LHD cars the hole was closed off with a small plastic plug, and is not present at all in RHD cars.



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems