Home 

 Moderated by: Greg Fletcher  
AuthorPost
nvandal
Member
 

Joined: 08-02-2005
Location:  
Posts: 58
Status: 
Offline
Hello,

Can anyone give me the correct KYB parts numbers for front and rear shocks? I have an account with a parts store that sells KYB but they couldn't get the numbers. Your help is appreciated.

Thanks,

Norm Vandal

Roxbury, VT

Judson Manning
Member


Joined: 03-14-2005
Location: Atlanta, Georgia USA
Posts: 406
Status: 
Offline
The shocks Delta sells are actually modified KYB units, so there is no direct drop-in part number.  At roughly $50ea they're a pretty good deal.  The Bilsteins available at JHPS are more expensive, but you get what you pay for....

nvandal
Member
 

Joined: 08-02-2005
Location:  
Posts: 58
Status: 
Offline
Do you have the parts numbers for these KYB shocks? Also, any idea of the modification? I figure if one person can do this, then I can too! It's likely that it's only on the attachments and not on the shock body itself. If anyone has a set accessible, can you look at the numbers stamped on the shocks for me. Thanks,

Norm Vandal

Mark Rosenbaum
Member


Joined: 03-12-2005
Location: Kingman, Arizona USA
Posts: 532
Status: 
Offline
I have no information on the KYB shocks that fit the rear of the car.

For the KYB front shocks I bought recently from Delta, the part number on the box was KG5501, which goes to a Chevy Corvette rear, 1963-1982.  Delta's modification seems to involve changing the metal sleeve in the upper bushing to a longer one that fits the JH crossmember, and perhaps also changing the lower bushing.  I'd guess that the cost of these modifications (parts and labor and setup, amortized) would be around $7-$10 per shock.

According to the flyer for Delta's most recent sale, which ended on 31 August, each front shock sold for $74.95 list / $59.95 sale, and each rear shock sold for $60.75 / $47.95.  The on-sale price seemed pretty reasonable to me.



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems