Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Clutch lever pins rotation

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Clutch lever pins rotation  Rate Topic 
AuthorPost
 Posted: 08-19-2023 09:28 pm
  PM Quote Reply
1st Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 646
Status: 
Offline
When changing the clutch, you will notice the wear on the front part of the two pins in the shift lever, where they contact the back of the groove in the T/O brg. These should be rotated 90 degrees to give a new/dimensionally-correct pin-to-groove mating so there is no slop in the lever when changing gears. Use a pin punch/whatever; you can tack weld the pin to the lever if difficult to rotate.
I recommend a light "grease" coating both on the input shaft casing for the T/O brg as well as in the groove of the T/O brg. to help with longevity.

Attachment: J-H clutch lever pin rotation.jpg2.jpg3 small.jpg (Downloaded 28 times)

Back To Top PM Quote Reply  

 Posted: 08-19-2023 09:31 pm
  PM Quote Reply
2nd Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 646
Status: 
Offline
pins

Attachment: J-H clutch lever pin rotation small.jpg (Downloaded 28 times)

Back To Top PM Quote Reply

 Posted: 08-19-2023 09:31 pm
  PM Quote Reply
3rd Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 646
Status: 
Offline
pins

Attachment: J-H clutch lever pin rotation.jpg2.jpg3 small.jpg (Downloaded 28 times)

Back To Top PM Quote Reply  

 Posted: 08-19-2023 09:32 pm
  PM Quote Reply
4th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 646
Status: 
Offline
pins

Attachment: J-H clutch lever pin rotation.jpg2 small.jpg (Downloaded 28 times)

Back To Top PM Quote Reply

 Posted: 08-19-2023 09:34 pm
  PM Quote Reply
5th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 646
Status: 
Offline
Sorry about the "mix-up": in the order of this, but somehow there is no preview(or maybe it does not work) but please notice the flat spot on the pin and after it has been rotated, using a brass hammer and steel punch for rotating the 2 pins

Back To Top PM Quote Reply  

Current time is 11:59 am  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Clutch lever pins rotation Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems