Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Pulley & Cam Belt Correct?

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Pulley & Cam Belt Correct?  Rate Topic 
AuthorPost
 Posted: 01-02-2022 01:32 pm
  PM Quote Reply
1st Post
Olddog12
Member
 

Joined: 11-25-2021
Location:  
Posts: 5
Status: 
Offline
Can anyone confirm this belt & pulleys are all compatible together? I recently purchased a JH, the cam pulleys were already installed and the belt & distributor pulley came in a bag. Just want to be sure as Ive read there are different type teeth on some.

Attachment: download.jpg (Downloaded 52 times)

Back To Top PM Quote Reply  

 Posted: 01-02-2022 01:33 pm
  PM Quote Reply
2nd Post
Olddog12
Member
 

Joined: 11-25-2021
Location:  
Posts: 5
Status: 
Offline
Picture2

Attachment: download (2).jpg (Downloaded 51 times)

Back To Top PM Quote Reply

 Posted: 01-02-2022 01:34 pm
  PM Quote Reply
3rd Post
Olddog12
Member
 

Joined: 11-25-2021
Location:  
Posts: 5
Status: 
Offline
Final picture

Attachment: download (1).jpg (Downloaded 51 times)

Back To Top PM Quote Reply  

 Posted: 01-02-2022 01:36 pm
  PM Quote Reply
4th Post
Olddog12
Member
 

Joined: 11-25-2021
Location:  
Posts: 5
Status: 
Offline
Sorry but I couldnt get all 3 photos on the first thread.

And can anyone tell me where I can get the belt tensioner gauge at? Im in Nova Scotia Canada BTW

Back To Top PM Quote Reply

 Posted: 01-02-2022 02:50 pm
  PM Quote Reply
5th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
I can not tell from the pic even after enlarging it. Please do NOT turn over the engine if not sure.
Putting a straight edge between the center of the 2 bolts holding the sprockets on, whatever line on the Intake(IN) should line up with whatever line on the exhaust(EX) is.
Please call (404)261-2552 or SKYPE me (RockClimber52) if you want real time help(all my info is in my "PROFILE" in you click that on.
happy new year, bruce

Back To Top PM Quote Reply  

 Posted: 01-02-2022 03:00 pm
  PM Quote Reply
6th Post
Olddog12
Member
 

Joined: 11-25-2021
Location:  
Posts: 5
Status: 
Offline
Thanks for the quick reply Bruce! I have drove the car as it is now so Im pretty sure all is well there. I hope to do the distributor pulley & new belt in the coming weeks but want to make sure all these components are compatible first.
Ive done some reading on the install of the belt and am quite nervous!
Kevin

Back To Top PM Quote Reply

 Posted: 01-02-2022 03:06 pm
  PM Quote Reply
7th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
okay--so please call/skype as you could be one tooth off and still drive the car. Also, the belt must be tensioned with a cold engine, which will take over 4 hours if you just drove it. You can not even start it for 15 seconds. bruce

Back To Top PM Quote Reply  

Current time is 08:05 am  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Pulley & Cam Belt Correct? Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems