Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Brakes > Lockheed Wheel cylinders

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Lockheed Wheel cylinders  Rate Topic 
AuthorPost
 Posted: 09-09-2021 05:40 pm
  PM Quote Reply
1st Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
Although this can be quite a chore without the well thought-out plan, here is the way I have been doing it for over 40 years(doesn't mean the "right way" or "Only way").
Making a 2X4 to fit the approximate shape of the wheel cylinder and reinforcing it with a piece of angle iron, should help with installing the troublesome circlip on the backing plate. pleas note that this circlip goes on the more "difficult" way. MOSS makes a tool for this, which I purchased a few years ago, but it does NOT work very well--I bent over 3 circlips before I went back to my old method. One other item: the snap ring pliers are from WIHA(German tools) and have a little groove cut into the ends to capture and hold the circlip. The cheap ones from Harbor Freight, etc, will likely slip as your using them, but I did use that cheaper style for years before getting the WIHA ones.[img][/img]

Attachment: J-H Lockheed wheel cylinder installation.jpg3s.jpg (Downloaded 43 times)

Back To Top PM Quote Reply  

 Posted: 09-09-2021 05:41 pm
  PM Quote Reply
2nd Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
[img][/img]

Attachment: J-H Lockheed wheel cylinder installation.jpg1s.jpg (Downloaded 44 times)

Back To Top PM Quote Reply

 Posted: 09-09-2021 05:41 pm
  PM Quote Reply
3rd Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
[img][/img]

Attachment: J-H Lockheed wheel cylinder installation.jpg2s.jpg (Downloaded 44 times)

Back To Top PM Quote Reply  

 Posted: 09-09-2021 05:42 pm
  PM Quote Reply
4th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
[img][/img]

Attachment: J-H Lockheed wheel cylinder installation.jpg4s.jpg (Downloaded 43 times)

Back To Top PM Quote Reply

 Posted: 09-09-2021 05:42 pm
  PM Quote Reply
5th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
[img][/img]

Attachment: J-H Lockheed wheel cylinder installation.jpg5s.jpg (Downloaded 43 times)

Back To Top PM Quote Reply  

 Posted: 09-09-2021 05:42 pm
  PM Quote Reply
6th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
[img][/img]

Attachment: J-H Lockheed wheel cylinder installation.jpg6s.jpg (Downloaded 44 times)

Back To Top PM Quote Reply

 Posted: 09-09-2021 05:43 pm
  PM Quote Reply
7th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
[img][/img]

Attachment: J-H Lockheed wheel cylinder installation.jpg7s.jpg (Downloaded 43 times)

Back To Top PM Quote Reply  

 Posted: 09-09-2021 05:44 pm
  PM Quote Reply
8th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
[img][/img]
This a a 12 point 17mm socket that I filed down the end to get the circlip fully engaged onto the slot in the wheel cylinder

Attachment: J-H Lockheed wheel cylinder installation.jpg8s.jpg (Downloaded 42 times)

Back To Top PM Quote Reply

 Posted: 09-09-2021 05:44 pm
  PM Quote Reply
9th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
[img][/img]

Attachment: J-H Lockheed wheel cylinder installation.jpg9s.jpg (Downloaded 42 times)

Back To Top PM Quote Reply  

 Posted: 09-09-2021 05:46 pm
  PM Quote Reply
10th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
[img][/img]
Please note the circlip has all 3 tabs fully onto the slot in the wheel cylinder. A little smearing of grease will help slide it around the the slot, etc.
Hope this helps, bruce

Attachment: J-H Lockheed wheel cylinder installation.jpg10s.jpg (Downloaded 42 times)

Back To Top PM Quote Reply

Current time is 08:48 pm  
> Jensen Healey & Jensen GT Tech > Brakes > Lockheed Wheel cylinders Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems