Home 

 Moderated by: Greg Fletcher  
AuthorPost
74beans
Member
 

Joined: 03-31-2018
Location:  
Posts: 10
Status: 
Offline
My carbon canister is shot. A couple questions:
1. If I remove it do I just plug vacuum line from manifold and vapor(?)one coming from tank? Do I have to make sure vapor line end is above tank level? As you know getting back into the hook-up on top of tank is not a fun job, and it doesn't seem to get any easier the more times I do it.
2. If I replace it does anyone know what the third nipple(?) is for? I have one that came from tank and one from vacuum. I like the idea of not emitting more gas fumes into the air.

redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 435
Status: 
Offline
You could remove it, but DO NOT plug the line from the gas tank(possible vacuum created). You could plug off the 2 brass nipples on the back of each carb., or just run a fuel line between them.
The 3rd nipple originally had a red plastic plug in it--yours must be missing



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems