Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Voltage stabilizer upgrade  Rate Topic 
AuthorPost
 Posted: 11-25-2019 10:29 pm
  PM Quote Reply
1st Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 263
Status: 
Offline
Some of you may have already done so, but replacing our antiquated bimetallic voltage stabilizer with a solid state electronic one is inexpensive and worth it, now that our cars are over 40 years old.(I have seen many of them "bad"( usually from the poor contact between the sheet metal screw and the casing) Make one yourself or shop around, but MOSS has them at a very reasonable price.
https://mossmotors.com/solid-state-voltage-stabilizer-negative-ground

happy "T"-Day, bruce

Back To Top PM Quote Reply  

 Posted: 11-25-2019 10:54 pm
  PM Quote Reply
2nd Post
pokeyjoe
Member
 

Joined: 10-01-2019
Location: Long Beach, CA USA
Posts: 14
Status: 
Offline
Thanks, Bruce. Where are these located?

Back To Top PM Quote Reply

 Posted: 11-25-2019 11:08 pm
  PM Quote Reply
3rd Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 263
Status: 
Offline
It's up under the dash, mounted between the FUEL & TEMP gauges, with a #2 cross-point(pozdriv) sheet metal screw. This is the metal backing "plate" holding all your gauges in place. If you're still spry and nimble, you can get to it by slithering upside down under the steering wheel and with dexterity  (voluminous levels of profanity may be surging by now) get at the screw after removing the 2 spade connectors.Better yet, any small child may welcome this as a challenge if you tempt them with some candy!

Back To Top PM Quote Reply  

Current time is 09:49 pm  
> Jensen Healey & Jensen GT Tech > Electrical & Instruments > Voltage stabilizer upgrade Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems