Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Seam Sealer  Rate Topic 
AuthorPost
 Posted: 08-22-2018 07:17 pm
  PM Quote Reply
1st Post
noomg
Member
 

Joined: 08-02-2018
Location: Long Beach, California USA
Posts: 320
Status: 
Offline
I was just wondering what you guys use for the seam sealer when reinstalling the fenders?

Back To Top PM Quote Reply  

 Posted: 08-23-2018 12:30 pm
  PM Quote Reply
2nd Post
Sander
Member


Joined: 03-15-2005
Location: Peachtree Corners, Georgia USA
Posts: 87
Status: 
Offline
There are many 3M products that could be used (and I'm sure other manufactureres too).

I've used 3M Dynatron 550 Auto Seam Sealer using a caulk gun and Evercoat 365 Brushable Seam Sealer, both with good results. Easy to use ... be aware of dry time with 3M product.

Back To Top PM Quote Reply

 Posted: 08-24-2018 02:36 pm
  PM Quote Reply
3rd Post
noomg
Member
 

Joined: 08-02-2018
Location: Long Beach, California USA
Posts: 320
Status: 
Offline
Sander,

Thanks for the response, I'm guessing by your warning that the 3M goes off fast. It sounds like you've already been through this(fenders off and on)so while were at it, what did you use for the plastic shims between the fenders and the rocker?

Back To Top PM Quote Reply  

Current time is 02:53 pm  
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Seam Sealer Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems