Home 
> Jensen Healey & Jensen GT Tech > Brakes > brake line fitting

 Moderated by: Greg Fletcher  
AuthorPost
Bfitz241
Member
 

Joined: 02-05-2015
Location: Saint Augustine, Florida USA
Posts: 161
Status: 
Offline
Would anyone know the size and thread of the brake line fittings where they attach t o the master?
I'm having no luck finding any locally and will have to order them from somewhere.
Are they British thread?
Thanks

redracer
Member
 

Joined: 09-10-2012
Location:  
Posts: 159
Status: 
Offline
Try typing in "British brake line fittings"; here's one place:
http://store.fedhillusa.com/britishgirling-316475nutsandfittings.aspx
Try Earl's as well.

British Girling 3/16"/4.75mm brake line tubing nuts and fittings.
store.fedhillusa.com/britishgirling-316475nutsandfittings.aspx
Results 1 - 15 of 15 - British/Girling - 3/16"/4.75mm brake line Nuts and Fittings. You must know the proper tubing size for your application first! You must use the same tube size that came installed on your vehicle. All the nuts on this page are for 3/16"/4.75mm brake lines.

Bfitz241
Member
 

Joined: 02-05-2015
Location: Saint Augustine, Florida USA
Posts: 161
Status: 
Offline
thanks..that's very helpful

redracer
Member
 

Joined: 09-10-2012
Location:  
Posts: 159
Status: 
Offline
As a follow up to the above website I posted:(the rear brake line fittings from the master are 3/8"X24 whereas the front brake fittings are 7/16"X20):

P10-3 - 3/8" x 24 unf male steel nut with non-threaded lead - SAE flare and DIN flare
3/8
Price: $2.20
Quantity:
1
Submit P10-3 - 3/8" x 24 unf male steel nut with non-threaded lead - SAE flare and DIN flare
Most common British nut 3/8" x 24 unf male steel nut with non-threaded lead, .812” long overall This nut works with both SAE (45 degree/ inverted/double) and DIN (bubble/ISO) flares Use with 3/16"/4.75mm brake line
**********************************************************
P26-3 - 7/16" x 20 unf male steel nut with non-threaded lead - SAE flare or DIN flare
7/16
Price: $3.50
Quantity:
1
Submit P26-3 - 7/16" x 20 unf male steel nut with non-threaded lead - SAE flare or DIN flare
7/16" x 20 unf male steel nut with non-threaded lead, .900” long overall This nut works with both SAE (45 degree inverted/double) and DIN (bubble/ISO) flares Use with 3/16"/4.75mm tubing



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems