| Moderated by: Greg Fletcher | ||
| Author | Post | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Bfitz241 Member 
|
Anyone successfully have an oil cooler repaired? Mine is seeping from one of the bottom rows. Definitely easier to replace it but trying to keep the budget in check. |
|||||||||
|
subwoofer Member
|
A fresh one from Setrab or any equivalent would be cheaper than repairing the old one. While at it, you should replace the sandwich plate with one with a thermostat. -- Joachim |
|||||||||
|
Bfitz241 Member
|
I googled Setrab and now have a new question; what are the fittings on the cooler? Is it AN or a British version thereof? Thanks Last edited on 11-28-2016 09:56 pm by Bfitz241 |
|||||||||
|
subwoofer Member
|
Oil coolers usually have female ports, so they are always supplied with adapters in place for the connection you want. AN, BSP and metric are equally common, a dealer should be able to supply what you need. They fit on all the existing bracketry, btw. -- Joachim |
|||||||||
|
subwoofer Member
|
If on a shoestring budget, search eBay for Mocal or Setrab, there are good prices to be found. Example: http://www.ebay.com/itm/UNIVERSAL-MOTORSPORT-MOCAL-10ROW-OIL-COOLER-10JIC-10-AN-10-OC5107-10-AAB/121385795451?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D2%26asc%3D38530%26meid%3D0beac6d7b79e42ac9c157a49870a7357%26pid%3D100005%26rk%3D5%26rkt%3D5%26sd%3D231942118787 |
|||||||||
|
Bfitz241 Member
|
That's good info, thanks. I had new oil lines made for the engine, but can't find the receipt and forgot what fittings they are. They're duplicates of what was there so I'm guessing some type of BSP...anyone know what these cars came with for sure? |
|||||||||
|
gmgiltd Member
|
I think the originals were 5/8" BSP Gordon |
|||||||||