Home 
> Jensen Healey & Jensen GT Tech > Miscellaneous > Tail Light Unevenness

 Moderated by: Greg Fletcher  
AuthorPost
JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
My mind is totally blown! The white JH on the back page of the Sept-Oct 2015 JHPS publication shows a white JH that looks very much like mine. Notice the right lens. It seems to be higher than the left (driver side) one. They are not even! It looks exactly like mine! This unevenness has bothered me for quite some time. It now appears that some, if not all JH were made like this. Am I wrong?

Screenplay
Member
 

Joined: 07-12-2013
Location: San Francisco, California USA
Posts: 124
Status: 
Offline
Is yours an early or later model? Have you measured them? I just measured various distances on both my 18059 and 19451. I got the exact same measurements on both. Don't know what is going on there.
Clinton

Last edited on 11-22-2015 02:53 am by Screenplay

JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
Late model. We measured things but only to make sure the car was level. My friend said the lens itself “could probably be adjusted.” He’ll try sometime.

Brett Gibson JH5 20497
Member
 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 798
Status: 
Offline
I have to say, I followed this car for many hundreds of miles and I have a critical eye when it comes to things being "OFF" (old machinist) and what you maybe seeing is shadows and not to flat a camera angle, believe me Arvins tail lights are perfectly aligned and flat in relationship to the car and bumper. That said I have also seem cars the are "OFF" but that is usually due to the bumper off kilt. If you want to see more photo's go to Jensen Travels on Facebook and you might get a better view.

Cheers Brett.

JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
Thanks. I'll take your suggestion.

JohnRLB
Member
 

Joined: 08-17-2005
Location:  
Posts: 44
Status: 
Offline
We’ve measured everything including bumper, deck lid and both lense placements. Our opinion: Right side (pass side) IS a bit higher. No shadows, No wrecks. My friends eyes are critical too (old home designer/builder.) ?

redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 626
Status: 
Offline
Might also check spacing between taillight and stainless steel side curves; you will likely find the left side "closer' than the right side



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems