Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Jammed pump jets  Rating:  Rating
AuthorPost
 Posted: 02-19-2015 06:49 pm
  PM Quote Reply
1st Post
UKJames
Member
 

Joined: 04-24-2014
Location: Berkshire, United Kingdom
Posts: 42
Status: 
Offline
Anyone got a good technique to get jammed pump jets out of a Dellorto? Mine are all completely solid. I've tried the needle nose pliers from above, and a wooden hammer handle from underneath. None of them are shifting. I think I could hang the car from the ceiling by those jets...

I've got a fresh set to go in but this looks like its going to take some time....

Back To Top PM Quote Reply  

 Posted: 02-23-2015 11:38 am
  PM Quote Reply
2nd Post
UKJames
Member
 

Joined: 04-24-2014
Location: Berkshire, United Kingdom
Posts: 42
Status: 
Offline
Managed to make a tool to press them out, they were completely knackered, they have clearly not been inspected since the car was built. Have replaced with some forward shooting 45 jets from Eurocarb. one of the pump jet circuits was so blocked I needed to remove the lead plug and drill it out, even a high pressure line didn't shift it. 40 years of gunk that had turned in to something resembling granite. Rest of the carbs had the usual accumulation in the pump housing and varnish everywhere.
Cleaned and refurbished the carbs and reassembled- put them back on car this morning, fired up first time after a 3 month lay off! (I haven't even balanced or set the mixtures yet)- leapt into life.
Sounds like a different engine, well pleased.

Back To Top PM Quote Reply

Current time is 02:55 pm  
> Jensen Healey & Jensen GT Tech > Carburetors > Jammed pump jets Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems