Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
clutch release arm  Rate Topic 
AuthorPost
 Posted: 12-13-2014 11:29 am
  PM Quote Reply
1st Post
Barthol
Member
 

Joined: 10-31-2013
Location: Denmark
Posts: 67
Status: 
Offline
Hi,

I have changed my clutch and have now assembled the gearbox to the engine.

My concern is with regard to the clutch release arm.
Without the tension from the cable I am able to move the arm out from the pivot on which it is attached with the clip.

The clip looks ok , and it worked fine last summer.

But my concern is ,Will it come loose when i am driving the car ?

Is the clip supposed to hold the arm firm to the pivot or is it held in place by the forces from the cable , clutch cover plate etc.

I would hate to put the engine back in the car just to experience that I have to tak it out again.

Any experience is welcome


kim

Back To Top PM Quote Reply  

Current time is 05:59 am  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > clutch release arm Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems