Home 
> Jensen Healey & Jensen GT Tech > Projects > Front anti-sway bars

 Moderated by: Greg Fletcher  
AuthorPost
tallyhoe
Member
 

Joined: 08-17-2014
Location:  
Posts: 16
Status: 
Offline
It appears that 13911 Barnfind spent a little time airborne and kinda bent the rear bushings back up into the frame a little. I got everything removed and the bushings are good red neopreme and the brackets got bent back to original shape. My question - short of shipping this thing off to the frame shop has any one tried just shimming up down the brackets so they a level? The frame itself is good.



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems