Home 
> Jensen Healey & Jensen GT Tech > Engine & Transmission > how do I check my oil pump.

 Moderated by: Greg Fletcher  
AuthorPost
Barthol
Member
 

Joined: 10-31-2013
Location: Denmark
Posts: 67
Status: 
Offline
Rebuilding my engine i mount what is supposed to be a freshly rebuild oil pump.

When mounted I decided to spin it using my cordless drill.
I spinned for 4 minutes at 1300 rpm without the it being able to build up pressure.

is the 1300 rpm to little ? I guess that it only corresponds to 650 engine rpm.

After this I put the pump in a vice and tried to measure the vacum with a vacuum gauge on a rubber flange.

At 1300 rpm it only produced 10 mbar of vacuum.

Is there a trio to start up a rebuild pump or could there be something wrong with it?

Br
Kim

Barthol
Member
 

Joined: 10-31-2013
Location: Denmark
Posts: 67
Status: 
Offline
Problem Solved.

I mounted the distributor and the oil pressure came immediately.
So now I learned it - No distributor-> no oil pressure :-(

I will go and mop up the oil now.

BR
Kim

Frank Schwartz
Member
 

Joined: 02-18-2011
Location:  
Posts: 313
Status: 
Offline
Ah, Ha !!!

gmgiltd
Member
 

Joined: 07-10-2012
Location: Whitehills , United Kingdom
Posts: 168
Status: 
Offline
This explains it well
http://img51.imageshack.us/img51/1961/nzxk.jpg



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems