Home 

 Moderated by: Greg Fletcher  
AuthorPost
Dick Fickey
Member
 

Joined: 04-05-2007
Location: Lake Havasu, Arizona USA
Posts: 27
Status: 
Offline
Is there any way to adjust the play out in the steering rack? I have checked everything else and the steering play is in the rack.

Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
No, if the pinion or the rack is worn you will need to have it rebuilt.

I tried .003" shims under the cap opposite where the shaft enters but it caused binding.

I have a zerk fitting in that cap and use grease in the rack instead of 90wt since the oil likes to leak into the boots.

Delta should be able to supply a rebuilt unit.

good luck, Kurt

Dick Fickey
Member
 

Joined: 04-05-2007
Location: Lake Havasu, Arizona USA
Posts: 27
Status: 
Offline
Thanks for the reply. I was afraid that was the case. I have a spare rack that does not appear to have any play in it. Just didn't want to change them out.



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems