Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Brakes > Lockheed Brake Release

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Lockheed Brake Release  Rate Topic 
 Posted: 03-16-2013 10:11 pm
  PM Quote Reply
1st Post
Jim DeClerck

Joined: 03-16-2005
Location: Huntington Beach, California USA
Posts: 73
My rear brakes (Lockheed) will not release after releasing the parking brake lever.  The linkage, including the lever that goes in through the backing plate, moves freely but the brake shoes are snug against the drum.  The wheels will turn using engine power but the brake shoes won't back off the drums. 

There is apparently a way to release the self adjusting mechanism using a flat screwdriver.  I've tried several flat screwdrivers but am not getting the shoes to release.  Is there a specific angle for the screwdriver to be applied?  Over the lever or under the lever?  Just tap it or should some leverage be applied?  In which direction?

I rebuilt these brakes a few years ago and they've been trouble-free until now.

Back To Top PM Quote Reply  

 Posted: 03-22-2013 08:22 pm
  PM Quote Reply
2nd Post

Joined: 07-10-2012
Location: Whitehills , United Kingdom
Posts: 154
Had a similar problem many years ago. Have you tried reversing quickly and then stomp on the brakes - sometimes that will free them off.

Back To Top PM Quote Reply

Current time is 08:44 pm  
> Jensen Healey & Jensen GT Tech > Brakes > Lockheed Brake Release Top

UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems