Home 

 Moderated by: Greg Fletcher  
AuthorPost
igdboss
Member


Joined: 08-31-2012
Location:  
Posts: 21
Status: 
Offline
Have the speedo out. Gasket dried up and in pieces. Replacement needed. Delta, Moss, Ace Hardware?

Thanks

Paul Koehler
Member


Joined: 04-06-2005
Location: Malone, New York USA
Posts: 94
Status: 
Offline
Time to practice your skills with an x-acto knife & suitable gasket material!

jcdean
Member
 

Joined: 02-22-2006
Location: Oklahoma City, Oklahoma USA
Posts: 169
Status: 
Offline
I have lost count of the gaskets I have made by tracing with a sharp pencil onto a Cheerio's box and cutting out same with an Xacto knife and scissors. Corn Flakes boxes work in a pinch.

Art DeKneef
Member
 

Joined: 03-12-2005
Location: Mesa, Arizona USA
Posts: 338
Status: 
Offline
Why not replace the gasket with an O-ring?

When I took the gauges out of the GT dash there was an )-ring between the gauge and the wooden dash. I would think it would be much easier to take a large and small gauge and get the appropriate size.

The sizes are approximately 2.25" and 3.25".

Multi Grain Cheerios here.

Art

 



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems