Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
40/45 DelOrtto's  Rating:  Rating
AuthorPost
 Posted: 02-13-2013 11:09 pm
  PM Quote Reply
1st Post
roverman
Member
 

Joined: 11-07-2008
Location:  
Posts: 85
Status: 
Offline
Is there a simple visual check, say a carb body # ? Thanks, roverman.

Back To Top PM Quote Reply  

 Posted: 02-13-2013 11:45 pm
  PM Quote Reply
2nd Post
Jim Ketcham
Member
 

Joined: 03-13-2005
Location: Salt Point, New York USA
Posts: 208
Status: 
Offline
On the top of each carb body there is casting identifying the carb. it should read DHLA45 or 40. Immediately after should be a stamped letter. As far as I know, all Lotus 907 Dellortos should be stamped E. The letter designates features such as emission versions, etc. The only way to determine the jetting is to disassemble and check each number.

Back To Top PM Quote Reply

 Posted: 02-13-2013 11:56 pm
  PM Quote Reply
3rd Post
roverman
Member
 

Joined: 11-07-2008
Location:  
Posts: 85
Status: 
Offline
Owning a machine shop, is it practicle/possible to bore-out 40's to 45mm , and install larger throttle plates ? Thanks, roverman.

Back To Top PM Quote Reply  

 Posted: 02-14-2013 12:34 am
  PM Quote Reply
4th Post
Jim Ketcham
Member
 

Joined: 03-13-2005
Location: Salt Point, New York USA
Posts: 208
Status: 
Offline
It's been done. I do not know how well they work. There are a pair of converted 40 to 45s on eBay. Here's the link:http://www.ebay.com/itm/LOTUS-907-DELLORTO-45-DHLA-CARBURETORS-/290826274153?pt=Motors_Car_Truck_Parts_Accessories&hash=item43b698c569&vxp=mtr

Back To Top PM Quote Reply

 Posted: 02-14-2013 12:54 am
  PM Quote Reply
5th Post
roverman
Member
 

Joined: 11-07-2008
Location:  
Posts: 85
Status: 
Offline
$715 ea. I would go injection- first. Thanks, roverman.

Back To Top PM Quote Reply  

 Posted: 02-14-2013 04:14 am
  PM Quote Reply
6th Post
Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
Since those carbs are jetted for a Lotus "Escalat" all bets are off!

For the modifications you've discussed FI seems like the way to go. Tuning Dellortos from scratch is a task that Lotus took years to get right.

The tuning of the original Dellorto 40's on the euro JH is far from perfect. Some of the "book" assumptions don't work for the pent roof 4 valve engine.

Thankfully, the Dellortos are infinitely tunable if you get the choke size right for the expected use of the engine.

Cheers,

Kurt

Back To Top PM Quote Reply

 Posted: 02-25-2013 07:16 pm
  PM Quote Reply
7th Post
subwoofer
Member
 

Joined: 04-01-2008
Location: Sandefjord, Norway
Posts: 617
Status: 
Offline
Back in the seventies wideband O2 sensors and data logging systems were not readily available. No one had those analytics capabilities back then, so no wonder it took them ages to get it fairly right. Add the lack of reliable spark due to points to the mix and it gets even worse to tune.

Today, if you have the inclination, an LM2 and a full tuning kit you should be able to get it right fairly quickly - even from scratch, given that you understand how the emulsion tube works.

But don't ask me how to tune the mid range, I only have a cloudy idea of how it works - EFI is much easier to grasp and does not have to be a compromise for any part of the operating range.

--
Joachim

Back To Top PM Quote Reply  

Current time is 01:13 pm  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > 40/45 DelOrtto's Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems