Home 

 Moderated by: Greg Fletcher  
AuthorPost
roverman
Member
 

Joined: 11-07-2008
Location:  
Posts: 85
Status: 
Offline
Is it possible  this series of motors share a common crankshaft , but different strokes ? I'm working with a crank manufacturer for potential of forged stroker cranks, for this series of engines. Anyone have interest in such ? Thanks, roverman.

Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
Garry Kemp has done at least a 2.5 liter IIRC.

Sounds expensive!

roverman
Member
 

Joined: 11-07-2008
Location:  
Posts: 85
Status: 
Offline
I suppose "expensive" is a relative term ? Isn't the cast 2.2L crank approx. $1,200, In the JHPS store ? Forged stroker will likely be less, based on volume. Regards, Art G.

Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
Sounds like a great project, Art! It sure makes for good reading!

Will you be using custom con rods and pistons?

roverman
Member
 

Joined: 11-07-2008
Location:  
Posts: 85
Status: 
Offline
Yes, based on what strokes prove compatable with potential of existing forging. Likely a shorter/lighter rod and less compression height on piston. Regards, Art G.



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems