Home 

 Moderated by: Greg Fletcher  
AuthorPost
blawrence
Member
 

Joined: 12-08-2009
Location: North Carolina USA
Posts: 23
Status: 
Offline
Does anyone have details on how to fit front and rear sway bars to 1973 Mk 1 JH

Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 977
Status: 
Offline
Contact the manufacturer here:


http://www.addco.net/aftermarket/contact/

blawrence
Member
 

Joined: 12-08-2009
Location: North Carolina USA
Posts: 23
Status: 
Offline
Thanks for the information.  I will contact them.

atgparker
Member


Joined: 06-23-2013
Location: Mission Viejo, California USA
Posts: 85
Status: 
Offline
The Addco hardware for the front link to the A-arms are useless. I used some longer larger diameter bolts and nuts with a longer spacer to clear the strut arm and match the angle of the lug that is part of the A-Arm

Attachment: WP_000517.jpg (Downloaded 49 times)

Last edited on 10-23-2013 05:23 am by atgparker

atgparker
Member


Joined: 06-23-2013
Location: Mission Viejo, California USA
Posts: 85
Status: 
Offline
For the rear I welded the adapter plates to the radius arms to get as much stiffness as I could from the bracket.

Attachment: WP_000518.jpg (Downloaded 47 times)

Last edited on 10-23-2013 05:24 am by atgparker



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems