| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| GT Fuel Tank | Rating: 
|
| Author | Post |
|---|
| Posted: 08-29-2012 08:07 pm |
|
1st Post |
|
rovohn Member 
|
Ok so I have removed the 2 straps,removed the filler neck and all of the smaller vent lines ,the sending unit wires and all?of the hoses under the car. The tank is still really tightly seated. How the !@% do I get the tank out? Cheers,John
|
||||||||||||||
| |||||||||||||||
| Posted: 08-29-2012 11:19 pm |
|
2nd Post |
|
rovohn Member
|
Crisis averted,the tank is out,wow that's a tight fit. Now to find a sending unit. John
|
|||||||||||||
| ||||||||||||||
| Posted: 08-30-2012 03:45 am |
|
3rd Post |
|
Jensen Healey Super Moderator 
|
Hi John, I haven't had to remove the tank yet. I was hoping for a few tips so when I do... Kurt
|
||||||||||||||
| |||||||||||||||
| Posted: 08-31-2012 02:28 am |
|
4th Post |
|
Art DeKneef Member
|
Kurt, It is pretty much just like John describes. When I took my GT gas tank out it was the same way. Remove the two straps, filler neck, vent lines, hoses and wires. Then you will have to pull down as the tank will be a tight fit with the junk that has accumulated around the tank and the two sticky foam strips that are attached to the top of the tank. If I remember right you pull down the tank from the front of the tank. The part closest to the interior of the car. I think there was a small ledge that the tank was close to preventing it to drop down all the way. Not too difficult just frustrating because of the space and the sticky tape. Art
|
|||||||||||||
| ||||||||||||||
| Current time is 06:39 pm | |
| > Jensen Healey & Jensen GT Tech > Fuel Stuff > GT Fuel Tank | Top |
