Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Cowl Shake  Rating:  Rating
AuthorPost
 Posted: 04-12-2012 04:18 pm
  PM Quote Reply
1st Post
TXJH
Member
 

Joined: 11-24-2005
Location: The Woodlands, Texas USA
Posts: 19
Status: 
Offline
I rode in a late model domestic convertible the other day and the "cowl shake" was horrible.  It felt as if the whole chassis was wobbling back and forth.  Since I have never actually ridden in my JH project, I was wondering what it is like in a JH.  I am in the process of replacing the rocker panels and floor pans, so what could I do without adding too much weight to stiffen the chassis?  I have replaced the floor supports with 1x2 rectangular steel and the floor pans are being made of 16 ga steel.

Back To Top PM Quote Reply  

 Posted: 04-12-2012 04:24 pm
  PM Quote Reply
2nd Post
JodyKerr
Member


Joined: 05-15-2006
Location: Tempe, Arizona USA
Posts: 217
Status: 
Offline
I've driven my somewhat crumbly pre-restoration JH for years (needs floorboards at a minimum). I've never noticed any cowl shake. In fact, the body has always felt good and solid while driving (now, mushed up bushings make for an interesting suspension...)

I've had this old car at pretty significant speeds, under significant acceleration and hard cornering.

Back To Top PM Quote Reply

Current time is 09:52 am  
> Jensen Healey & Jensen GT Tech > Body & interior stuff > Cowl Shake Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems