Home 

 Moderated by: Greg Fletcher  
AuthorPost
Mitch Ware
Member


Joined: 03-12-2005
Location: Albany, New York USA
Posts: 204
Status: 
Offline
On the race car that I am building, I want to use a remote oil filter housing and get the filter out from under the carbs. To this end, I need a version of the oil cooler sandwich plate that usually goes between the filter and pump housing, but is blank on the filter side so that oil will just be sent via lines to the remote housing that I am mounting on the right frame rail.

Anyone know of a suitable item that would work?

Thanks,

Mitch Ware
#19670
#11002

RG
Member
 

Joined: 09-27-2010
Location: Troy, New York USA
Posts: 13
Status: 
Offline
Hey Mitch,

Canton has Remote Filter Adapters.... I believe the OEM Lube Oil Filter thread is 3/4 x 16 but check...they also have the remote mounting plate. What's nice about their adapter is that the inlet/outlet ports rotate 360>. http://www.cantonracingproducts.com

Rob
#13934

Mitch Ware
Member


Joined: 03-12-2005
Location: Albany, New York USA
Posts: 204
Status: 
Offline
Ah, I see where they have that, thanks!

Mitch Ware
#19760
#11002

Last edited on 04-10-2012 07:19 pm by Mitch Ware



UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems