Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Speedo Cable  Rate Topic 
AuthorPost
 Posted: 03-20-2012 02:07 pm
  PM Quote Reply
1st Post
Paul Koehler
Member


Joined: 04-06-2005
Location: Malone, New York USA
Posts: 94
Status: 
Offline
Just finished the change over from 4-speed to 5-speed, and getting ready to install the 5-speed speedometer cable into its housing on the Getrag unit and noticed something was missing. Is there a drive or linkage that goes between the end of the cable and its insertion point on the transmission? What am I missing?

 

Back To Top PM Quote Reply  

 Posted: 03-22-2012 01:27 pm
  PM Quote Reply
2nd Post
Brett Gibson JH5 20497
Member
 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 798
Status: 
Offline
Paul, if memory serves me correctly the cable just goes in the side of the trans. and a small bolt holds it in I dont recall any gear drives and such on the side, if you want me to I will go up were the my car is stored and have a look to be sure, let me know.

Brett

Back To Top PM Quote Reply

 Posted: 03-22-2012 04:36 pm
  PM Quote Reply
3rd Post
MikeIsotech
Member


Joined: 04-22-2010
Location: Winchester, United Kingdom
Posts: 33
Status: 
Offline
Brett Gibson JH5 20497 wrote:
Paul, if memory serves me correctly the cable just goes in the side of the trans. and a small bolt holds it in I dont recall any gear drives and such on the side, if you want me to I will go up were the my car is stored and have a look to be sure, let me know.

Brett


I put mine in a few months ago and that's how I remember it. The end of the cable pushes into the gearbox and is held by a small locking bolt.

Mike

Back To Top PM Quote Reply  

Current time is 04:47 pm  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Speedo Cable Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems