Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Body & interior stuff > best way to attach a boot lid finisher

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
best way to attach a boot lid finisher  Rate Topic 
AuthorPost
 Posted: 02-13-2012 08:15 pm
  PM Quote Reply
1st Post
chiromaster
Member
 

Joined: 03-22-2010
Location: Phoenix, Arizona USA
Posts: 37
Status: 
Offline
What has been the best way to attach the boot lid finisher? Specifically the middle three holes.  I have the stud plates for the other holes. I got some clips from Delta and they said to drill the hole bigger so they will fit...the hole is getting big and they still dont fit.

Back To Top PM Quote Reply  

 Posted: 02-14-2012 07:49 am
  PM Quote Reply
2nd Post
MikeIsotech
Member


Joined: 04-22-2010
Location: Winchester, United Kingdom
Posts: 33
Status: 
Offline
I managed to buy some modern plastic clips which did the job nicely. If the holes are getting too big, why not fill them in and drill new holes nearby. The location of the clips isn't that precise...

Back To Top PM Quote Reply

 Posted: 02-14-2012 01:23 pm
  PM Quote Reply
3rd Post
Brett Gibson JH5 20497
Member
 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 798
Status: 
Offline
If your having trouble with the clip's go to a auto body shop and have them attach the trim, the new modern clips work just as well and are easier to use and it should be a pretty cheap job.

Brett

Back To Top PM Quote Reply  

Current time is 06:30 am  
> Jensen Healey & Jensen GT Tech > Body & interior stuff > best way to attach a boot lid finisher Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems