Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Gasket and sealant questions

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Gasket and sealant questions  Rate Topic 
AuthorPost
 Posted: 01-13-2012 09:38 pm
  PM Quote Reply
1st Post
Bob 13902
Member
 

Joined: 04-05-2006
Location:  
Posts: 35
Status: 
Offline
OIL PAN GASKET - last engine tear down I got some gasket material from NAPA and cut my own. It never leaked. Since you still can't buy one (at least from Delta), I was wondering if folks are going with Loctite 518 or some other "gasket-less" option that works well?

WELLSEAL - Since it is costly to buy in the USA, is Permatex Aviation #3 (which seems to exceed WELLSEAL specs and 1/3 the cost) an equivalent substitute or is there a better option where the repair manual calls for WELLSEAL?

Back To Top PM Quote Reply  

Current time is 12:10 pm  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Gasket and sealant questions Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems