Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Starter Motor?  Rating:  Rating
AuthorPost
 Posted: 09-22-2011 04:43 am
  PM Quote Reply
1st Post
SpeedyMitch
Member


Joined: 12-17-2009
Location: Hailey, Idaho USA
Posts: 83
Status: 
Offline
Sometimes my J-H won't start. I get my goggles, gloves, special driving slippers and hat on, turn the key and....

....nothing.

No click, no starter motor, no go. The lights dim and the battery tests fine.

It seems that if I can 'nudge' the starter by moving the car a bit it will start. Push start works every time but hills are not always convenient.

Sounds like starter motor or starter solenoid. Is there any way to diagnose either or should I just give Delta a call and get a new starter/solenoid combo?

Any advice is appreciated.

Mitch

Back To Top PM Quote Reply  

 Posted: 09-22-2011 04:52 am
  PM Quote Reply
2nd Post
JodyKerr
Member


Joined: 05-15-2006
Location: Tempe, Arizona USA
Posts: 217
Status: 
Offline
Before you yank you the starter make sure you're getting good current/amperage at the starter. Clean all the wiring connections including the engine ground.

If that doesn't work you can pull the starter. Any autozone/checker can test it. If it's gonzo, then get one from Delta. On the plus side, it's an inexpensive unit.

If you want something a little more sexy/modern I highly recommend looking into those modern gear reduction starters. I put one on my TR8 and I will now put one on every car that's not concours.

Back To Top PM Quote Reply

 Posted: 09-22-2011 02:38 pm
  PM Quote Reply
3rd Post
Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 983
Status: 
Offline
Hi Mitch,

I think Jody is correct. I had some problems with filthy loose connections. After a good cleaning and pinching a few connections I almost forgot there was ever an issue.

I have a few starter and solinoid units if you want one.

Back To Top PM Quote Reply  

 Posted: 09-23-2011 12:19 am
  PM Quote Reply
4th Post
Lash Russell
Member


Joined: 07-23-2005
Location: Franktown, Colorado USA
Posts: 69
Status: 
Offline
Hi Mitch,

  I had a similar problem a couple of years ago, pulled everything apart, cleaned, searched, nothing.  Then, I can't remember exactly why, I pulled the "seat belt warning module" (I think it is called and sprayed the inside with electrical contact cleaner and everything has been fine sice then.  It almost drove me crazy.  The unit is under dash, drivers side attached to the left foot footwell and has a circular wire connection (with several wires attached).  Comes off with two screwsand isn't that hard to get at.

  Hope this helps,

Lash

 

Back To Top PM Quote Reply

 Posted: 09-23-2011 04:34 am
  PM Quote Reply
5th Post
Mason Jones
Member


Joined: 06-03-2011
Location: Austin, Texas USA
Posts: 97
Status: 
Offline
Another simple thing you might check (just because it's easy) before pulling the starter is the wires going to the ignition switch.

Easy enough to check, just wiggle the yellow bundle of wires under the steering wheel while turning the key.

I proudly brought my wife out to try out the car after having spent 2 weeks fixing the brakes and as soon as she sat in the car...it wouldn't start. Lights, radio, and everything else worked but no click or anything from the starter.

It turns out someone had "repaired" the loose wires by hot-gluing them into the ignition switch.

Back To Top PM Quote Reply  

 Posted: 09-24-2011 07:53 am
  PM Quote Reply
6th Post
normv
Member


Joined: 08-07-2006
Location: Sydney, Australia
Posts: 46
Status: 
Offline
If you need a new starter try  http://www.ebay.com.au/itm/Gear-Reduction-Starter-Motor-LOTUS-Esprit-Jensen-Healey-/230620025065?pt=Vintage_Car_Truck_Parts_Accessories&hash=item35b20650e9 I got one for the Hi compresion race engine and it works well

Back To Top PM Quote Reply

 Posted: 09-24-2011 03:09 pm
  PM Quote Reply
7th Post
JodyKerr
Member


Joined: 05-15-2006
Location: Tempe, Arizona USA
Posts: 217
Status: 
Offline
If you prefer a vendor to ebay contact Ted at TSI.

http://www.tsimportedautomotive.com/gearreductionstarters.html

Back To Top PM Quote Reply  

 Posted: 09-26-2011 03:09 am
  PM Quote Reply
8th Post
dwalls1
Member
 

Joined: 04-11-2008
Location: Bloomfield, New Mexico USA
Posts: 207
Status: 
Offline
I thought I had my original starter fixed several times, before I bought a geared unit. It's the only way to go. I didn't get mine from Ted, but he is a class act and one of those that makes the Brit Car Hobby enjoyable.

Back To Top PM Quote Reply

 Posted: 10-20-2011 12:54 am
  PM Quote Reply
9th Post
yellowjh
Member
 

Joined: 03-02-2011
Location: New Orleans, Louisiana USA
Posts: 14
Status: 
Offline
Speedy Mitch...I have one of those new gear reduction starters still in the box if you are interested...send me an email off the board

Back To Top PM Quote Reply  

 Posted: 10-22-2011 08:34 am
  PM Quote Reply
10th Post
Frank Schwartz
Member
 

Joined: 02-18-2011
Location:  
Posts: 313
Status: 
Offline
If Mitch doesn't want it, I'd be intersted.  Kindly contact me off line at mfsjr2@comcast.net

Thanks,

Frank

Back To Top PM Quote Reply

 Posted: 10-24-2011 02:37 pm
  PM Quote Reply
11th Post
SpeedyMitch
Member


Joined: 12-17-2009
Location: Hailey, Idaho USA
Posts: 83
Status: 
Offline
Jensen Healey wrote: I had some problems with filthy loose connections. After a good cleaning and pinching a few connections I almost forgot there was ever an issue.
I cleaned up the crazy botch-job left by the PO around the starter, alternator, and coil.

Unfortunately there must have been some magic in the diced and spliced wires 'cause now the JH won't even turn on. When I turn the key I get no lights on the dash, no fuel pump, no starter.

The battery is charged, headlights bright. I have checked the connections vrs the wiring the diagram and it all looks good. Fuses on the firewall are good.

Is there some hidden fuse or other trip somewhere that I'm missing?

Back To Top PM Quote Reply  

 Posted: 10-25-2011 01:10 pm
  PM Quote Reply
12th Post
Brett Gibson JH5 20497
Member
 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 798
Status: 
Offline
Mitch first off I would check for a good ground between engine and frame, then start checking continuity of the wires alot of the wiring just needs a small flex and will brake inside, also I have seen an additional inline fuse up under the dash on some cars towards the fuse box.

Good luck. Brett

Back To Top PM Quote Reply

 Posted: 10-25-2011 03:30 pm
  PM Quote Reply
13th Post
pbahr
Member


Joined: 04-15-2005
Location: Phoenixville, Pennsylvania USA
Posts: 202
Status: 
Offline
The Jensen boys used Lucas electrical bits - known to be the worst in the world.
Take the Ignition Switch for example: It is a fragile item, not designed for the current loads imposed by Jensen engineers and worst of all, it is open to the world of dirt, dust and sand blowing around the cockpit at 90mph.

Take that beast out of the car and clean / lubricate it. It may change your life..............

Pete Bahr

Back To Top PM Quote Reply  

 Posted: 08-30-2020 03:04 pm
  PM Quote Reply
14th Post
Elanplus2
Member
 

Joined: 04-02-2017
Location: St. Paul, Minnesota USA
Posts: 8
Status: 
Offline
Is there supposed to be a spacer between the starter motor and the mounting face of the engine?

Back To Top PM Quote Reply

 Posted: 08-30-2020 04:05 pm
  PM Quote Reply
15th Post
redracer
Member
 

Joined: 09-10-2012
Location: BROOKHAVEN, Georgia USA
Posts: 617
Status: 
Offline
No; bolts right up to it

Back To Top PM Quote Reply  

Current time is 08:38 am  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Starter Motor? Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems