Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Sender range  Rate Topic 
AuthorPost
 Posted: 08-11-2011 07:22 pm
  PM Quote Reply
1st Post
jcdean
Member
 

Joined: 02-22-2006
Location: Oklahoma City, Oklahoma USA
Posts: 169
Status: 
Offline
What is the range of the stock sending unit?

I am considering installing an aftermarket fuel cel that has a sender that is 0 ohms empty to 90 orhms full.

Of course, this would be too easy, so I know there is a catch.

Back To Top PM Quote Reply  

 Posted: 08-14-2011 02:59 pm
  PM Quote Reply
2nd Post
dwalls1
Member
 

Joined: 04-11-2008
Location: Bloomfield, New Mexico USA
Posts: 204
Status: 
Offline
I haven't a clue what the resistance is on the stock unit. I could measure the spare TR7 one I have. Perhaps you could remove yours from the tank, hook it up to the gauge, move the float manually and see what you get.  Just how you would recalibrate it if your readings were way off, I don't know. I will mull it over and if I get an inspiration I will let you know.

Back To Top PM Quote Reply

 Posted: 08-14-2011 04:57 pm
  PM Quote Reply
3rd Post
Jensen Healey
Super Moderator


Joined: 03-11-2005
Location: San Anselmo, California USA
Posts: 977
Status: 
Offline
http://www.jensenhealey.com/forums/view_topic.php?id=704&forum_id=7&highlight=ohms

Back To Top PM Quote Reply  

 Posted: 08-15-2011 12:58 pm
  PM Quote Reply
4th Post
jcdean
Member
 

Joined: 02-22-2006
Location: Oklahoma City, Oklahoma USA
Posts: 169
Status: 
Offline
Nice to see that this is bass ackwards from what I have found.

Well, I was looking at aftermarket gauges some day.  Maybe that day is sooner than I expected.

Back To Top PM Quote Reply

Current time is 04:06 pm  
> Jensen Healey & Jensen GT Tech > Fuel Stuff > Sender range Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems