Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Gearshift Position  Rate Topic 
AuthorPost
 Posted: 01-04-2011 11:13 pm
  PM Quote Reply
1st Post
Bogie07
Member
 

Joined: 12-08-2010
Location:  
Posts: 29
Status: 
Offline
On my 5 speed transmission, when you put it into reverse, 2nd, or 4th, the gearshift pushes the whole center console forwards. Is there a way to get rid of this? Or is this how they came?

Back To Top PM Quote Reply  

 Posted: 01-05-2011 12:32 am
  PM Quote Reply
2nd Post
JodyKerr
Member


Joined: 05-15-2006
Location: Tempe, Arizona USA
Posts: 217
Status: 
Offline
It sounds like either your console isn't in the correct position or the shifter bushings are terribly sloppy.

Back To Top PM Quote Reply

 Posted: 01-05-2011 04:29 am
  PM Quote Reply
3rd Post
pbahr
Member


Joined: 04-15-2005
Location: Moorestown, New Jersey USA
Posts: 198
Status: 
Offline
First, you have to be certain that the console is secured to the sheetmetal of The rear shelf.  There is a small metal tab at the rear of the console where two small screws attach it to the shelf.  Without this fixation, the console can easily move fore and aft.

YELODOG

Back To Top PM Quote Reply  

 Posted: 01-05-2011 04:30 am
  PM Quote Reply
4th Post
Bogie07
Member
 

Joined: 12-08-2010
Location:  
Posts: 29
Status: 
Offline
Thanks guys.

Back To Top PM Quote Reply

Current time is 10:53 pm  
> Jensen Healey & Jensen GT Tech > Engine & Transmission > Gearshift Position Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems