Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
DOOR PANELS  Rate Topic 
AuthorPost
 Posted: 11-29-2010 01:48 am
  PM Quote Reply
1st Post
txk
Member
 

Joined: 11-06-2007
Location: Waikoloa, Hawaii USA
Posts: 13
Status: 
Offline
THIS MAY SEEM BASIC TO MOST OF YOU, BUT I NEED TO KNOW HOW TO REMOVE THE DOOR PANELS. THANKS FOR THE HELP.

GARY SMITH

 

Back To Top PM Quote Reply  

 Posted: 11-29-2010 07:04 pm
  PM Quote Reply
2nd Post
Brett Gibson JH5 20497
Member
 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 712
Status: 
Offline
Gary, take the arm rest off, 2 screws, window crank, 1 screw, any stainless trim you might or might not have, and then from the bottom use a srew driver or flat blade scrapper and pry away from door, there are a bunch of plastic snaps that hold it in place that go along the bottom and both ends, the top has a lip you just lift the panel up and off.

You will probably brake some of the snaps doing it, so save a good one and go to an auto upholstery place, they should have replacements or at lleast tell you were to get them.

Brett

 

Back To Top PM Quote Reply

 Posted: 11-29-2010 07:51 pm
  PM Quote Reply
3rd Post
txk
Member
 

Joined: 11-06-2007
Location: Waikoloa, Hawaii USA
Posts: 13
Status: 
Offline
BRETT--THANKS A LOT FOR INFO. HAVE HADE MGB'S IN THE PAST AND FROM WHAT YOU DESCRIBED IT IS THE SAME. I HAVE NEW WINDOW CRANK AND DOOR LATCH HARDWARE WHICH WILL HELP THE APPREARANCE.

GARY SMITH

Back To Top PM Quote Reply  

Current time is 01:38 pm  
> Jensen Healey & Jensen GT Tech > Body & interior stuff > DOOR PANELS Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems