Home 
Home Search search Menu menu Not logged in - Login | Register
> Jensen Healey & Jensen GT Tech > Carburetors > Petronix & plug gap

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
Petronix & plug gap  Rate Topic 
AuthorPost
 Posted: 08-04-2010 04:47 pm
  PM Quote Reply
1st Post
colinw59
Member


Joined: 02-14-2006
Location: Bloomfield/Hebron, Connecticut USA
Posts: 147
Status: 
Offline
I've heard that if you install a Petronix ignition and coil you should open the plug gap up to 0.035". Which, if I remember correctly, is 0.010 over stock! Is this correct? 

Back To Top PM Quote Reply  

 Posted: 08-04-2010 05:21 pm
  PM Quote Reply
2nd Post
Greg Fletcher
Administrator


Joined: 03-11-2005
Location: Lake Nacimiento, California USA
Posts: 421
Status: 
Offline
Yes, that's a smart idea. The usefulness of increasing the gap will vary depending on what type of coil you are running, if using a Blaster Coil, I'd say it's essential. If using the stock or a Lucas Super Sport coil, a smaller increase in the gap may still help.

Back To Top PM Quote Reply

 Posted: 08-04-2010 05:53 pm
  PM Quote Reply
3rd Post
colinw59
Member


Joined: 02-14-2006
Location: Bloomfield/Hebron, Connecticut USA
Posts: 147
Status: 
Offline
It's a Petronix coil Greg.

Back To Top PM Quote Reply  

 Posted: 08-08-2010 01:00 am
  PM Quote Reply
4th Post
Paul Koehler
Member
 

Joined: 04-06-2005
Location: Malone, New York USA
Posts: 88
Status: 
Offline
I run .032 with good results.

Back To Top PM Quote Reply

Current time is 03:52 pm  
> Jensen Healey & Jensen GT Tech > Carburetors > Petronix & plug gap Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems