Home 
Home Search search Menu menu Not logged in - Login | Register

 Moderated by: Greg Fletcher
New Topic Reply Printer Friendly
steering wheel  Rating:  Rating
AuthorPost
 Posted: 06-07-2010 08:48 pm
  PM Quote Reply
1st Post
Vernon
Member
 

Joined: 11-26-2007
Location:  
Posts: 4
Status: 
Offline
Hi all a bit of advice needed please. I have just refitted my steering column after a restoration job and when I fit the steering wheel there does not appear to be enough column showing above the indicator stalk and when I fit and tighten the nut the steering wheel is forced onto the indicatot stalk canceling ring and all jams up. Am I missing something, a spacer or something. What are thoughts. Thanks

Back To Top PM Quote Reply  

 Posted: 06-08-2010 12:52 pm
  PM Quote Reply
2nd Post
Brett Gibson JH5 20497
Member
 

Joined: 03-17-2005
Location: Hilton, New York USA
Posts: 712
Status: 
Offline
Vernon, there is no real spacer in that sense but there is a split wedge shaped washer that sit's just after the splines, it is in two pieces and when reinstalling it it's best to put some grease on it to hold in place, then slide the steering wheel down the splines. If you dont have it that could cause this issue.

Back To Top PM Quote Reply

 Posted: 06-12-2010 11:11 pm
  PM Quote Reply
3rd Post
Vernon
Member
 

Joined: 11-26-2007
Location:  
Posts: 4
Status: 
Offline
Thanks for that, I must have lost mine but have now ordered two and all is well, so thanks for the quick reply. Vern

Back To Top PM Quote Reply  

Current time is 06:01 pm  
> Jensen Healey & Jensen GT Tech > Suspension > steering wheel Top




UltraBB 1.172 Copyright © 2007-2011 Data 1 Systems