| ||||
| ||||
| Moderated by: Greg Fletcher |
|
||||||||||||||
| Heater hose routing | Rate Topic |
| Author | Post |
|---|
| Posted: 10-30-2009 09:11 pm |
|
1st Post |
|
George Member
|
Howdy all. Long time no post. Since i bought my JH, the heater has never been hooked up. The upper hose thru the firewall is connected to the lower radiator hose, but the lower hose thru the firewall is capped off. Where is it supposed to connect? I always assumed my heater core is shot and that is why the PO disconnected it, but maybe it's just a problem with the valve. So I thought I'd try hooking it up. Thanks for any info. George
|
||||||||||||||
| |||||||||||||||
| Posted: 10-30-2009 11:28 pm |
|
2nd Post |
|
Jensen Healey Super Moderator 
|
Connect it to the center of the intake manifold where it bolts onto the head. Kurt
|
|||||||||||||
| ||||||||||||||
| Current time is 11:52 pm | |
| > Jensen Healey & Jensen GT Tech > Cooling > Heater hose routing | Top |
